|
Wake On LAN* provides the server with the capability to go into a sleep mode and wake up when it senses network activity.
WOL is a component of Intel's Wired for Management (WfM) Initiative.
To enable WOL on the Intel® N440BX Server Board, your power supply must support 0.8A of +5v standby current
that powers the Baseboard Management Controller (BMC) when the server is in a powered-down state. If you don't
have these power requirements, the "WOL Enable" jumper must be placed in the Disabled position or the system will not boot.
This applies to:
| 
