Server Products
Intel® Modular Server System MFSYS25
What Are the Requirements to Use SSD Hard Drives?

The AXXTM3SATA accessory (MM# 903639) must be used to add SSD hard drives to the Intel® Modular Server Systems MFSYS25,  MFSYS25V2, or MFSYS35.

Attaching the board and bracket assembly to a 2.5" Solid-State Drive (SSD) or a 2.5" Serial ATA (SATA) hard drive converts the single port SATA interface into a dual port SAS interface.
 
The drive can now be accessed by both storage control modules if they are installed. It also changes the activity LEDs to match the behavior of SAS hard drives.



Limitations and instructions for using SATA drives can be found in the

Tested hardware and operating system list (THOL)

This applies to:

Intel® Modular Server System MFSYS25
Intel® Modular Server System MFSYS25V2
Intel® Modular Server System MFSYS35

Solution ID: CS-031001
Last Modified: 20-Oct-2014
Date Created: 21-Oct-2009
Back to Top