Support Home



Search
Support & Downloads
Server Products
Intel® Server Chassis SR1450
System Cooling Information

The chassis provides four redundant system fans (40x40x56mm dual rotor fans) and two redundant power supply fans.

Note that the system fans are only redundant when running Low Voltage processors.

The power supply fans are only redundant in the 1+1 power supply configuration.

There is also one additional non-redundant system fan (40x40x28mm single rotor fan) cooling the PCI section. When external ambient temperatures remain within specified limits, the cooling system will provide sufficient air flow for all hot-swap drive, processors, memory, and add-in card configurations.

This applies to:
Intel® Server Chassis SR1450

End of Interactive Support Disclaimer
These products are no longer being manufactured by Intel. Additionally, Intel no longer provides interactive support for these products via telephone or e-mail, nor will Intel provide any future software updates to support new operating systems or improve compatibility with third party devices and software products.

THESE DOCUMENTS ARE PROVIDED FOR HISTORICAL REFERENCE PURPOSES ONLY AND ARE SUBJECT TO THE TERMS SET FORTH IN THE "Terms of use". For information on currently available Intel products, please see www.intel.com/products.
Solution ID: CS-020539
Date Created: 27-Feb-2005
Last Modified: 12-Nov-2009
Back to Top