Some SCSI Hot-Swap backplanes, PBA A77570-202, were manufactured with a crystal that may produce an incorrect frequency of 13.3 MHz. This incorrect frequency will result in loss of hot plug feature and will require a system reset when hard drives are swapped in a RAID configuration. Systems using RAID controllers of any type of RAID controller access the SCSI backplane SAF-TE controller via the SCSI bus using standard SAF-TE SCSI protocol commands. All identified failures to date have been in systems with RAID controllers that were unable to initialize the RAID array.

TA_668.PDF
Size: 2136249 bytes
Date: 10/13/2003 12:45:54 PM

Note: PDF Files require Adobe Acrobat* Reader^†

This applies to:

Intel® Server Chassis SR1300