|
The Intel® Entry Server Chassis SC5295-E has two control panels available that are dependent on chassis configuration. The SC5295UP configuration has a one button, one LED control panel, and the SC5295DP, SC5295WS and SC5295BRP configurations have a three button, five LED control panel.
When the hot-swap drive bay is installed, a bi-color hard drive LED is located on each drive carrier (six total) to indicate specific drive failure or activity. These LEDs are visible upon opening the front bezel door.
SKU SC5295UP
The UP configuration has a one piece bezel with one button and one LED indicator, as shown in the following figure. The Entry Ebay SSI (rev 3.5) compliant control panel header for Intel® server boards is located on the back of the control panel. This allows for connection of a 34-pin ribbon cable for use with SSI rev 3.5-compliant server boards. The connector cable is compatible with the 24-pin SSI standard and is provided with the chassis kit.
SKUs SC5295DP/WS/BRP
The control panel buttons and LED indicators for the DP, WS and BRP configurations are displayed in the following figure. The Entry Ebay SSI (rev 3.5) compliant front panel header for Intel® server boards is located on the back of the front panel. This allows for connection of a 24-pin ribbon cable for use with SSI rev 3.5-compliant server boards. The connector cable is compatible with the 24-pin SSI standard.
This applies to:
| 
