Intel® Server Chassis SC5000 - Second Hot Swap Drive Carrier Upgrade Kit Missing a Cover Plate [TA-427-1.PDF]

Support Home

Support & Downloads

Intel® Server Chassis SC5000

Second Hot Swap Drive Carrier Upgrade Kit Missing a Cover Plate [TA-427-1.PDF]

AHD2HSDRVUGU second hot swap drive bay upgrade kit is missing a cover plate. This cover plate is mounted on the rear of the chassis adjacent to the fan using two screws. The purpose of the plate (approximately 3" x 4") is to cover the holes in the rear of the chassis and thereby provide better airflow through the rear chassis mounted fan.

For more information, please see the Technical Advisory.

TA-427-1.PDF
Size: 11427 bytes
Date: 8/10/01 9:04:47 AM

Note: PDF Files require Adobe Acrobat* Reader^†

^† This link will take you off of the Intel Web site. Intel does not control the content of the destination Web Site.

This applies to:

Intel® Server Chassis SC5000

End of Interactive Support Disclaimer
These products are no longer being manufactured by Intel. Additionally, Intel no longer provides interactive support for these products via telephone or e-mail, nor will Intel provide any future software updates to support new operating systems or improve compatibility with third party devices and software products.

THESE DOCUMENTS ARE PROVIDED FOR HISTORICAL REFERENCE PURPOSES ONLY AND ARE SUBJECT TO THE TERMS SET FORTH IN THE "Terms of use". For information on currently available Intel products, please see www.intel.com/products.

Solution ID: CS-006550
Date Created: 09-Nov-2003
Last Modified: 10-Nov-2003