Support Home



Search
Support & Downloads
Server Products
Intel® AD450NX Server Platform
Core/Bus Ratio Jumper Settings

The Bus ratio jumper block (J31) on the Intel® A450NX CPU baseboard should be configured as follows to support the 550 MHz Intel® Pentium® III Xeon® Processor on the Intel® AD450NX Server System:

  • Pins 5-6: closed
  • Pins 7-8: closed
  • Pins 9-10: closed
Note: Closed = jumper installed. BIOS PR11 or higher is required to support 550 MHz Intel® Pentium® III Xeon® processors.

This applies to:
Intel® AD450NX Server Platform

End of Interactive Support Disclaimer
These products are no longer being manufactured by Intel. Additionally, Intel no longer provides interactive support for these products via telephone or e-mail, nor will Intel provide any future software updates to support new operating systems or improve compatibility with third party devices and software products.

THESE DOCUMENTS ARE PROVIDED FOR HISTORICAL REFERENCE PURPOSES ONLY AND ARE SUBJECT TO THE TERMS SET FORTH IN THE "Terms of use". For information on currently available Intel products, please see www.intel.com/products.
Solution ID: CS-013882
Date Created: 26-Jul-2004
Last Modified: 03-Oct-2005
Back to Top