Support Home



Search
Support & Downloads
Server Products
Intel® T440BX Server Board
Wake On LAN*

Wake On LAN* provides the server with the capability to go into a sleep mode and wake up when it senses network activity. WOL is a component of Intel's Wired for Management (WfM) Initiative.

To enable WOL on the Intel® T440BX (NL440BX) server board, your power supply must support 0.8A (800mA) of +5v standby current that powers the Baseboard Management Controller (BMC) when the server is in a powered-down state. If you don't have these power requirements, the "WOL Enable" jumper must be placed in the Disabled position or the system will not boot.

This applies to:
Intel® T440BX Server Board

End of Interactive Support Disclaimer
These products are no longer being manufactured by Intel. Additionally, Intel no longer provides interactive support for these products via telephone or e-mail, nor will Intel provide any future software updates to support new operating systems or improve compatibility with third party devices and software products.

THESE DOCUMENTS ARE PROVIDED FOR HISTORICAL REFERENCE PURPOSES ONLY AND ARE SUBJECT TO THE TERMS SET FORTH IN THE "Terms of use". For information on currently available Intel products, please see www.intel.com/products.
Solution ID: CS-015046
Date Created: 24-Aug-2004
Last Modified: 22-Apr-2005
Back to Top