Support Home



Search
Support & Downloads
Server Products
Intel® T440BX Server Board
Server Board Fails to Boot

Here are some things to check if your Intel® T440BX (NL440BX) board fails to boot:

  • Ensure you are using memory from the tested memory list.
  • Ensure the processor is firmly seated into the Slot 1 Connector.
  • Make sure your power supply provides 0.8A (800mA) of +5v standby current. If it does not, disable Wake On LAN* via the jumper on the motherboard.

This applies to:
Intel® T440BX Server Board

End of Interactive Support Disclaimer
These products are no longer being manufactured by Intel. Additionally, Intel no longer provides interactive support for these products via telephone or e-mail, nor will Intel provide any future software updates to support new operating systems or improve compatibility with third party devices and software products.

THESE DOCUMENTS ARE PROVIDED FOR HISTORICAL REFERENCE PURPOSES ONLY AND ARE SUBJECT TO THE TERMS SET FORTH IN THE "Terms of use". For information on currently available Intel products, please see www.intel.com/products.
Solution ID: CS-015017
Date Created: 24-Aug-2004
Last Modified: 06-Jun-2005
Back to Top