|
The memory module on the Intel® Server Board S3200SH/S3210SH has 4 DIMM sockets, which can hold up to 8GB of unbuffered ECC and non-ECC DDR2-667 or DDR2-800 memory using four 72-bit DIMM modules. The following memory features are supported:
- DDR2-667 and DDR2-800 unbuffered ECC and non-ECC compatible 1.8V modules (in compliance with the DDR JEDEC DIMM Specification).
- DIMMs with capacity of 512 MB, 1 GB, and 2 GB. Other DRAM sizes may function correctly but will not be validated.
- Minimum configuration is 512 MB using one 512 MB DIMM.
- Maximum configuration is 8 GB.
The table below shows a pre-generated list for the following Intel systems.
The PDF list is current as of February 2009, there are no plans to update the document.
Note: PDF Files require Adobe Acrobat* Reader*
This applies to:
| 
