• System Memory Features
• Supported SO-DIMM Configurations
• Tested Memory

Updated: July 2008

System Memory Features
The board has four DIMM sockets and supports the following memory features:

• 1.8 V DDR2 SDRAM SO-DIMMs
• Unbuffered, single-sided or double-sided SO-DIMMs with the following restriction: Double-sided DIMMs with x16 organization are not supported.
• 4 GB maximum total system memory
• Minimum total system memory: 256 MB
• Non-ECC DIMMs
• Serial Presence Detect
• DDR2 800 and DDR2 667 MHz SDRAM DIMMs

Notes:

To be fully compliant with all applicable DDR SDRAM memory specifications, the board should be populated with DIMMs that support the Serial Presence Detect (SPD) data structure. This allows the BIOS to read the SPD data and program the chipset to accurately configure memory settings for optimum performance. If non-SPD memory is installed, the BIOS will attempt to correctly configure the memory settings, but performance and reliability may be impacted or the DIMMs may not function under the determined frequency.

Supported DIMM Configurations
The following table lists the supported DIMM configurations.

Tested Memory
The table below lists parts which passed testing conducted during Intel’s validation of Mobile Board MGM45RM.

Operating System:

Windows Vista* 64, Windows Vista* 32, Windows* XP 64-Bit Edition, Windows* XP Professional, Windows* XP Home Edition, Windows* XP Media Center Edition

This applies to:

Intel® Mobile Board MGM45WU