|
End of Interactive Support
Intel is announcing the end of interactive support for the Intel® VS440FX Motherboard. See the End of Interactive Support Announcement for details.
Final BIOS and drivers
The final Intel® VS440FX Motherboard BIOS is BIOS 1.00.18.CS1.
Motherboard fails to power-up
If your Intel® VS440FX Motherboard fails to power-up, check that the power supply provides a 3.3 volt connection to the motherboard. Also see the Technical Product Specification.
External speaker
The external speaker connector does not support the common four-pin speaker connection. For details, please see the Technical Product Specification and Motherboard Specification Update.
Windows* 95 with CD-ROM or second hard drive
Having problems with Windows* 95 and a CD-ROM or second hard drive? There are two known issues that may be affecting your system: you may need to update Windows* 95 to recognize the Intel 82371AB PIIX4 IDE Controller, or your IDE CD-ROM may not comply with the ATAPI specification.
System memory
System memory may use either 36-bit ECC or parity SIMMs. See the list of tested memory.
Disable integrated audio, USB or hardware monitor
BIOS setup options are available to disable the integrated audio, USB or hardware monitor. These options are detailed in the Technical Product Specification.
Microprocessors supported
The Intel® VS440FX Motherboard supports Pentium® Pro processors with VID at 150, 166, 180 and 200 MHz. Changing to one of these processors requires changes in several jumper settings. The Intel® VS440FX Motherboard also supports the Pentium® II OverDrive® processor.
This applies to:
| 
