|
Different versions of the Intel® SE440BX-2 Motherboards provide different processor support. The processor's VID pins automatically program the voltage regulator on the desktop board to the required processor voltage. The system bus speed of 66 MHz or 100 MHz is automatically selected.
The processor connects to the desktop board through the 242-contact slot connector.
Warning: Processors not specifically listed by type and rated speed may have requirements that are not supported by the desktop board's design. Use of unsupported processors may result in improper operation, damage to the desktop board or processor, or reduced product life.
| Processor Family |
Processor Speed |
System Bus Frequency |
Cache Size |
BIOS Version |
Notes |
| Pentium® III processor |
850 MHz |
100 MHz |
256 KB |
P14 or greater |
The following board revisions (AA numbers) support these processors:
754552-200 or later
754558-200 or later
A01450-200 or later.
See the board revision note, below, for an explanation. |
| 800 MHz |
100 MHz |
256 KB |
P14 or greater |
| 750 MHz |
100 MHz |
256 KB |
P14 or greater |
| 700 MHz |
100 MHz |
256 KB |
P14 or greater |
| 650 MHz |
100 MHz |
256 KB |
P14 or greater |
| 600E MHz |
100 MHz |
256 KB |
P14 or greater |
| 550E MHz |
100 MHz |
256 KB |
P14 or greater |
| 600 MHz |
100 MHz |
512 KB |
P12 or greater |
All board revisions support these processors |
| 550 MHz |
100 MHz |
512 KB |
P07 or greater |
| 500 MHz |
100 MHz |
512 KB |
P07 or greater |
| 450 MHz |
100 MHz |
512 KB |
P07 or greater |
| Pentium® II processor |
450 MHz |
100 MHz |
512 KB |
P01 or greater |
| 400 MHz |
100 MHz |
512 KB |
P01 or greater |
| 350 MHz |
100 MHz |
512 KB |
P01 or greater |
| 333 MHz |
66 MHz |
512 KB |
P01 or greater |
| 300 MHz |
66 MHz |
512 KB |
P01 or greater |
| 266 MHz |
66 MHz |
512 KB |
P01 or greater |
| 233 MHz |
66 MHz |
512 KB |
P01 or greater |
| Intel® Celeron® processor |
433 MHz |
66 MHz |
128 KB |
P01 or greater |
| 400 MHz |
66 MHz |
128 KB |
P01 or greater |
| 366 MHz |
66 MHz |
128 KB |
P01 or greater |
| 333 MHz |
66 MHz |
128 KB |
P01 or greater |
| 300A MHz |
66 MHz |
128 KB |
P01 or greater |
| 300 MHz |
66 MHz |
0 KB |
P01 or greater |
| 266 MHz |
66 MHz |
0 KB |
P01 or greater |
|
Use of unsupported processors may result in improper operation, damage to the desktop board or processor, or reduced product life. Except as provided in Intel's Terms and conditions of Sale for such products, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY, RELATING TO SALE AND/OR USE OF THE INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES
RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT
COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
Board Revision note: A small bar-coded label, similar to the diagram shown below, can be found on the component side of the desktop board. The numbers following the letters "AA" can help identify the type and version of your desktop board. The AA contains a 6
digit main number, and a 3 digit dash number (the 3 numbers following the "-".
The statement "...or later" refers to the dash number of the AA (the three numbers following the
"-"). If this number is greater than the number listed in the table, the board supports the associated processor(s).
If your 6 digit main number is not listed in the table, contact your system manufacturer for processor support information.
This applies to:
| 
