Support Home



Search
Support & Downloads
Desktop Boards
Desktop Boards
When BIOS is changed - new hardware detected after loading device drivers

This is caused when the BIOS Setup program resets of the device enumeration table. Windows* 2000 on the first reboot of your computer will detect some devices as new hardware. If this occurs, all drivers will be located and installed. However, you will need to reinstall the USB 2.0 drivers.

A new BIOS revision is available for these Intel® Desktop Boards that prevents this from occurring. Download and install the BIOS updates revision, available at the links listed below.

BIOS revisions available:


All relevant instruction are provided to download and install the BIOS update.

Operating System:
Windows 2000*

This applies to:
Intel® Desktop Board D845GBV
Intel® Desktop Board D845GRG

End of Interactive Support Disclaimer
These products are no longer being manufactured by Intel. Additionally, Intel no longer provides interactive support for these products via telephone or e-mail, nor will Intel provide any future software updates to support new operating systems or improve compatibility with third party devices and software products.

THESE DOCUMENTS ARE PROVIDED FOR HISTORICAL REFERENCE PURPOSES ONLY AND ARE SUBJECT TO THE TERMS SET FORTH IN THE "Terms of use". For information on currently available Intel products, please see www.intel.com/products.
Solution ID: CS-009035
Date Created: 01-Feb-2004
Last Modified: 24-Jun-2009