Desktop Boards
Intel® NUC Boards and Kits
System Memory

Memory requirements

  • Supports two 1.35V DDR3L (low voltage) SO-DIMMs
  • 1333 or 1600 MHz
  • Unbuffered, non-ECC
  • Minimum recommended memory: 1 GB
  • Maximum memory: 16 GB
  • Serial presence detect (SPD)
Notes
  • 1.5 V DDR3 memory modules are not supported.
  • If you plan to install just one SO-DIMM, install it in the upper memory socket.

See the technical product specification for your Intel® NUC for complete system memory details and requirements.

Tested memory
Computer Memory Test Labs* (CMTL) tests third-party memory for compatibility with Intel boards as requested by memory manufacturers. See the CMTL Advanced Tested Memory List.

Parts listed in the table passed testing during development. Part numbers are not always readily available throughout the product life cycle.

Module manufacturer Module part number Module size Module speed
ADATA* AXDS1600GC4G9-2 4GB 1600 MHz
Centon Electronics M1050.01 8GB 1600 MHz
Centon Electronics M1051.01 8GB 1600 MHz
Centon Electronics M1052.01 8GB 1600 MHz
Crucial* CT8G3S160BM 8GB 1600 MHz
Crucial CT51264BF160BJ 4GB 1600 MHz
Micron* MT16KTF1G64HZ-1G6E1 8GB 1600 MHz
Micron MT8KTF51264HZ-1G6E1 4GB 1600 MHz
Micron MT4KTF25664HZ-1G6E1 2GB 1600 MHz
Mushkin 997037 4GB 1600 MHz
Samsung M471B1G73BH0-YK0 8GB 1600 MHz
Samsung M471B5273DH0-YK0 4GB 1600 MHz
Samsung M471B5773DH0-YK0 2GB 1600 MHz
SK Hynix HMT41GS6AFR8A-PB 8GB 1600 MHz
SK Hynix HMT451S6AFR8A-PB 4GB 1600 MHz
SK Hynix HMT425S6AFR6A-PB 2GB 1600 MHz
Related topic
Troubleshooting memory issues

This applies to:

Intel® NUC Board D34010WYB
Intel® NUC Kit D34010WYK

Solution ID: CS-034586
Last Modified: 12-Dec-2014
Date Created: 23-Oct-2013