If the power supply is not properly configured and connected to the board, damage to the board can result, or the board does not work properly.
- Verify that the power supply has the capacity to power all the devices used in your computer.
- If the power supply or the AC outlet has an on/off switch, make sure that it is turned on.
- Connect the power supply to the matching power connector on the board.
2 x 2 or 2 x 4 power supply cables and connection:
2 x 12 or 2 x 10 power supply cables and connection:
- Make sure the voltage setting on the back of the power supply is set correctly for your location.
This applies to: