Desktop Boards
Intel® 4 Series Chipset Boards
Intel® Management Engine BIOS Extension

This .PDF document lists the Intel® Management Engine BIOS Extension (Intel® MEBx) options and settings for Intel® desktop boards. The Intel® MEBx configuration program can be used to view and change the Intel® Management Engine settings for the computer.

Note The MEBx is intended for use by advanced users. Making changes in the MEBx configuration program can cause system problems. The MEBx configuration should only be changed from default settings to address a specific need.

To access the MEBx:

  1. After the initial boot screen, the following message is displayed: Press <Ctrl-P> to enter MEBx Setup.
  2. Press Ctrl-P.

The presence of menus and settings are dependent on your board model, hardware components installed, and the BIOS version.

If the system locks, or does not boot after making Intel® MEBx settings changes, try a BIOS recovery as described at Instructions for Recovery BIOS Update.

icon  Intel® MEBx Settings [PDF]
File Name: IntelMEBxSettings_v02.pdf
Size: 41 KB
Date: November 2008

Note: PDF Files require Adobe Acrobat* Reader*

This applies to:

Intel® Desktop Board DB43LD
Intel® Desktop Board DG43NB
Intel® Desktop Board DG45FC
Intel® Desktop Board DG45ID
Intel® Desktop Board DH55HC
Intel® Desktop Board DH55TC
Intel® Desktop Board DH57DD
Intel® Desktop Board DH57JG
Intel® Desktop Board DP43TF
Intel® Desktop Board DQ43AP
Intel® Desktop Board DQ45CB
Intel® Desktop Board DQ45EK
Intel® Desktop Board DQ57TM
Intel® Desktop Board DX58OG
Intel® Desktop Board DX58SO2



Solution ID: CS-029882
Last Modified: 12-Jul-2011
Date Created: 29-Oct-2008
Back to Top