• Memory Features
• Supported DIMM Configurations
• Tested Memory

• Four 240-pin Double Data Rate 3 (DDR3) SDRAM Dual Inline Memory Module (DIMM) connectors with gold-plated contacts arranged in two channels
• 1600/1333/1066 MHz DDR3 SDRAM interface
• Support for single- and dual-channel memory interleaving
• Unbuffered, non-registered single- or double-sided DIMMs with a voltage rating of less than 1.6 V. Using a DIMM with a voltage rating higher than 1.6 V may damage the processor.
• Non-ECC DDR3 memory
• Serial Presence Detect (SPD) memory only
• Up to 16 GB maximum total system memory

“DS” refers to double-sided memory modules (containing two rows of SDRAM) and “SS” refers to single-sided memory modules (containing one row of SDRAM).


Tested Memory

3rd Party Tested Memory*
3rd party tested memory occurs as requested by the memory vendors and is tested at an independent memory house that is not a part of Intel - Computer Memory Test Labs (CMTL).

Vendor Self Tested Memory
Intel supplies the memory vendors that participate in this program with a common memory test plan to use as a basic checkout of the memory stability. Memory listed here was either tested by the memory vendor or by Intel using this test plan. These part numbers may not be readily available throughout the product life cycle.

The table below lists parts which passed testing conducted using Intel's Self Test program for Intel® Desktop Board DP55SB.

This applies to:

Intel® Desktop Board DP55SB