Desktop Boards
Intel® Desktop Board DH77KC
System memory

Contents:


System memory features
The board has four DIMM sockets and supports the following memory features:

  • 1.5V DDR3 SDRAM DIMMs with gold plated contacts, with the option to raise the voltage to support higher performance DDR3 SDRAM DIMMs.
  • 1.35V Low Voltage DDR3 DIMMs (JEDEC specification)
  • Two independent memory channels with interleaved mode support
  • Unbuffered, single-sided, or double-sided DIMMs with the following restriction: Does not support double-sided x16 DIMMs.
  • 32 GB maximum total system memory (with 4 Gb memory technology).
  • Minimum recommended total system memory: 1 GB
  • Non-ECC DIMMs
  • Serial Presence Detect
  • DDR3 1600 MHz, DDR3 1333 MHz, and DDR3 1066 MHz SDRAM DIMMs. Third-generation Intel® Core processors are the only processor family that supports DDR3 1600 MHz DIMMs.
  • XMP version 1.3 performance profile support for memory speeds up to 1600 MHz
For full compliance with all applicable Intel SDRAM memory specifications, the board requires DIMMs supporting the Serial Presence Detect (SPD) data structure. Using DIMMS that support SPD, allows the BIOS to read the SPD data and program the chipset to accurately configure memory settings for optimum performance. If non-SPD memory is installed, the BIOS tries to correctly configure the memory settings, but performance and reliability can be impacted. Also, the DIMMs might not function under the specified frequency.


Supported memory configurations

DIMM Capacity Configuration SDRAM Density SDRAM Organization Front-side / Back-side Number of SDRAM Devices
1 GB Single-sided 1 Gbit 128 M x 8 / empty 8
2 GB Double-sided 1 Gbit 128 M x 8 / 128 M x 8 16
2 GB Single-sided 2 Gbit 256 M x 8 / empty 8
4 GB Double-sided 2 Gbit 256 M x 8 / 256 M x 8 16
4 GB Single-sided 4 Gbit 512 M x 8 / empty 8
8 GB Double-sided 4 Gbit 512 M x 8 / 512 M x 8 16

Tested memory

Computer Memory Test Labs* (CMTL) tests third-party memory for compatibility with Intel boards as requested by memory manufacturers. See the CMTL tested memory list* for this Intel® Desktop Board.

The table below lists parts which passed testing during development. These part numbers may not be readily available throughout the product life cycle.

Module manufacturer Module part number Module size Module speed
Adata* M3OHYMH3J4130G2C5Z 2 GB 1333
Adata AX3U1600GB2G9 2 GB 1600
Apacer* 240P 1 GB 1333
Elpida* EBJ10UE8BAFA-AG-E 1 GB 1066
Elpida EBJ21UE8BBF0 2 GB 1066
Elpida EBJ10UE8BDF0 1 GB 1333
Elpida EBJ21UE8BBF0-DJ-F 2 GB 1333
Elpida EBJ20UF8BDW0-GN-F 2 GB 1600
Elpida EBJ41UF8BDW0-GN-F 4 GB 1600
Hynix* HMT112U6BFR8C-G7 1 GB 1066
Hynix HMT125U6BFR8C-G7 2 GB 1066
Hynix HMT112U6TFR8C-H9 1 GB 1333
Hynix HMT125U6BFR8C-H9 2 GB 1333
Hynix HMT351U6AFR8C-H9 4 GB 1333
Hynix HMT325U6BFR8C-PB 2 GB 1600
Hynix HMT351U6CFR8C-PB 4 GB 1600
Hynix HMT41GU6MFR8C-PB 8 GB 1600
Kingston* HP497156-C01-ELB 1 GB 1333
Kingston KHX1600C9D3 2 GB 1600
Kingston KHX1866C9D3T1K3/3GX 1 GB 1866
Kingston KHX2133C9AD3T1K2 2 GB 2133
Micron* MT8JTF12864AY 1 GB 1066
Micron MT16JTF25664AY-1G1D1 2 GB 1066
Micron MT8JTF12864AZ-1G4F1 1 GB 1333
Micron MT16JTF25664AY-1G4D1 2 GB 1333
Micron MT8JTF25664AZ-1G6M1 2 GB 1600
Micron MT16JTF51264AZ-1G6M1 4 GB 1600
Micron MT16JTF1G64AZ-1G6D1 8 GB 1600
Micron MT16KTF1G64HZ-1G6D1 8 GB 1600
Qimonda* IMSH51U03A1F1C 512 MB 1066
Qimonda IMSH1GU13A1F1C 1 GB 1066
Qimonda IMSH2GU13A1F1C 2 GB 1333
Samsung* M378B22873DZ1-CH9 1 GB 1333
Samsung M378B5673FH0-CH9 2 GB 1333
Samsung M378B5273DH0-CH9 4 GB 1333
Samsung M378B5773DH0-CK0 2 GB 1600
Samsung M378B5273DH0-CK0 4 GB 1600
Samsung M391B1G73BH0-CK0 8 GB 1600
Samsung M378B2873EH1-CF8 1 GB 1066
Samsung M378B5673DZ1-CF8 2 GB 1066

This applies to:

Intel® Desktop Board DH77KC

Solution ID: CS-033194
Last Modified: 31-Jul-2012
Date Created: 21-Feb-2012