Desktop Boards
Intel® Desktop Board DG43RK
System Memory

Content
System memory features
Supported memory configurations
Tested memory


System memory features

  • Four Double Data Rate 3 (DDR3) SDRAM Dual Inline Memory Module (DIMM) connectors with gold-plated contacts
  • Non-ECC, 1.5 V, DDR3 1333(OC)/1066/800 MHz memory
  • Serial Presence Detect (SPD) memory only
  • Unbuffered, non-registered single- or double-sided DIMMs (except double-sided DIMMs with x16 organization)
  • Up to 8.0 GB utilizing2 Gb technology
  • A minimum of 512 MB of total memory is required

To be fully compliant with all applicable DDR SDRAM memory specifications, the board should be populated with DIMMs that support the Serial Presence Detect (SPD) data structure. This allows the BIOS to read the SPD data and program the chipset to accurately configure memory settings for optimum performance. If non-SPD memory is installed, the BIOS will attempt to correctly configure the memory settings, but performance and reliability may be impacted or the DIMMs may not function under the determined frequency.

Supported memory configurations

DIMM Capacity Configuration SDRAM Density SDRAM Organization Front-side/Back-side Number of SDRAM Devices
1 GB Single-sided 1 Gbit 1 GB x8 / empty 8
2 GB Double-sided 1 Gbit 1 GB x8 / 1 GB x8 16
2 GB Single-sided 2Gbit 2GB x8 / empty 8
4GB Double-sided 2Gbit 2GB x8 / 2 GB x8 16

Third party tested memory

Computer Memory Test Labs* (CMTL) tests third-party memory for compatibility with Intel boards as requested by memory manufacturers. See the CMTL tested memory list for this Intel® Desktop Board.

This applies to:

Intel® Desktop Board DG43RK



Solution ID: CS-031256
Last Modified: 21-Oct-2014
Date Created: 31-Jan-2010
Back to Top