Desktop Boards
Intel® Desktop Board DG35EC
System Memory

System memory features
The board has four DIMM sockets and supports the following memory features:

  • Four 240-pin Double Data Rate 2 (DDR2) SDRAM dual inline memory module
    (DIMM) connectors with gold-plated contacts
  • Non-ECC DDR2 800/667 1.8 V
  • Serial Presence Detect (SPD) memory only
  • Unbuffered, non-registered, single or double-sided DIMMs
  • Up to 2.0 GB utilizing 256 Mb technology
  • Up to 4.0 GB utilizing 512 Mb or 1 Gb technology
  • Up to 8.0 GB utilizing 1 Gb technology
Notes To be fully compliant with applicable Intel SDRAM memory specifications, the board requires DIMMs supporting the Serial Presence Detect (SPD) data structure. Desktop board DG35EC has four 240-pin DDR2 DIMM sockets arranged as DIMM 0 and DIMM 1 in both Channel A and Channel B.

Regardless of the memory configuration used (dual or single channel), Channel A, DIMM 0 must always be populated. This is a requirement of the ICH9DH Manageability Engine feature.

Supported DIMM configurations
The following table lists the supported DIMM configurations:

DIMM Type SDRAM Technology Smallest usable DIMM (one x16 Single-sided DIMM) Largest usable DIMM (one x8 Double-sided DIMM) Maximum capacity with two identical x8 Double-sided DIMMs

DDR2 667

512 Mbit

256 MB

1 GB

2 GB

DDR2 667

1 Gbit

512 MB

2 GB

4 GB

DDR2 800

512 Mbit

256 MB

1 GB

2 GB

DDR2 800

1 Gbit

512 MB

2 GB

4 GB

Tested memory

Third-party tested memory*
3rd party tested memory occurs as requested by the memory vendors. Memory is tested at an independent memory house that is not a part of Intel - Computer Memory Test Labs (CMTL).

Vendor self tested memory
Intel supplies the memory vendors that participate in this program with a common memory test plan to use as a basic checkout of the memory stability. Memory listed here was either tested by the memory vendor or by Intel using this test plan. These part numbers might not be readily available throughout the product life cycle.

The table below lists parts that passed testing conducted using the Intel Self Test program for Intel® Desktop Board DG35EC.

Module Supplier / Module Part Number Module Size Module Speed (MHz) Latency CL-tRCD-tRP ECC or Non-ECC? DIMM Organization Module Date Code Component Used / Comp Part Number
ADATA* AD2800E002G0U 2 GB 800 4/4/4 Non-ECC DSX16    
Apacer* AU01GE667C5KBG 1 GB 667 5/5/5 Non-ECC DSX8 0752 Qimonda* HYB18T512800AF37
bit4ram* BEU06464D4B71PE-30 512 MB 667 5/5/5 Non-ECC SSX8 0724 E718H8GA9T0V
Crucial* CT12864AA667.8FE 1 GB 667 5/5/5 Non-ECC SSx8 0650 Micron* MT47H128M8HQ
Elixir* M2Y51264TU88B4B 512 MB 667 5/5/5 Non-ECC SSX8 0723 Elixir N2TU512808E-3C 715298TOCV
Hynix* HYMP532U64BP6-Y5 256 MB 667 5/5/5 Non-ECC SSX16 0622 Hynix HY5PS121621B FP-Y5 622A
Hynix HYMP564U64CP8-Y5 AB 512 MB 667 5/5/5 Non-ECC SSX8 0723 Hynix HY5PS12821CFP-Y5
Kingmax* KLDD48F-A8KB5 1 GB 800 5/5/5 Non-ECC DSX8   Kingmax KKA8FFBXF-QFX-25A
Micron MT8HTF6464AY-80ED4 512 MB 800 5/5/5 Non-ECC SSX8 0638 Micron 6SD22 D9GKX
NANYA* NT1GT64U8HB0BY-25D 1 GB 800 6/6/6 Non-ECC DSX8 0728 NANYA NT5TU64M88E-25D 71957200CP
NANYA NT512T64U88B0BY-25C 512 MB 800 5/5/5 Non-ECC SSX8 0615 NANYA NT5TU64M88E-25C 60220800CP
PATRIST* PSD251280081 512 MB 800 5/5/5 Non-ECC SSX8 0651 PATRIST PM64MBD2BU-25EC
PNA* PC16F5664T2AG0CKT08B1402410 2 GB 800 5/5/5 Non-ECC DSX8   Geil* GL2L128M088BA180

This applies to:

Intel® Desktop Board DG35EC



Solution ID: CS-028864
Last Modified: 08-Oct-2014
Date Created: 21-Feb-2008
Back to Top