|
This document shows the location of the major components on the Intel® Desktop Board D945GNT.
| Label |
Description |
| A |
Auxiliary fan connector (optional) |
| B |
Speaker |
| C |
PCI Express x1 bus add-in card connectors [2] |
| D |
Audio codec |
| E |
Front panel audio connector |
| F |
Ethernet device |
| G |
PCI Conventional bus add-in card connectors [2] |
| H |
PCI Express x16 bus add-in card connector |
| I |
Back panel connectors |
| J |
+12V power connector (ATX12V) |
| K |
Rear chassis fan connector |
| L |
LGA775 processor socket |
| M |
Intel 82945G GMCH |
| N |
Processor fan connector |
| O |
DIMM Channel A sockets [2] |
| P |
DIMM Channel B sockets [2] |
| Q |
SCSI LED connector (optional) |
| R |
Legacy I/O controller |
| S |
Power connector |
| T |
Diskette drive connector |
| U |
Parallel ATE IDE connector |
| V |
Battery |
| W |
Front chassis fan connector |
| X |
BIOS Setup configuration jumper block |
| Y |
Serial ATA connectors [4] |
| Z |
Auxiliary front panel power LED connector |
| AA |
Front panel connector |
| BB |
Front panel USB connectors [2] |
| CC |
Chassis intrusion connector |
| DD |
Intel 82801G I/O Controller Hub (ICH7) |
| EE |
SPI flash device |
| FF |
IEEE-1394a controller (optional) |
| GG |
Front panel IEEE-1394a connectors (optional) [2] |
| HH |
PCI Conventional bus add-in card connectors [2] | |
This applies to:
| 
