|
This document shows the location of the major components on the Intel® Desktop Board D945GCZ.
| Label |
Description |
| A |
Front panel audio connector |
| B |
Back panel connectors |
| C |
Main power connector |
| D |
Front panel USB connectors [2] |
| E |
Serial ATA connectors [4] |
| F |
PCI Express x16 bus add-in card connector |
| G |
PCI Conventional bus add-in card connectors [2] |
| H |
PCI Express x1 bus add-in card connector |
| I |
Speaker |
| J |
IEEE-1394a controller (optional) |
| K |
BIOS Setup configuration jumper block |
| L |
Front panel IEEE-1394a connectors (optional) [2] |
| M |
Legacy I/O controller |
| N |
Diskette drive connector |
| O |
Front panel connector |
| P |
Front chassis fan connector |
| Q |
Auxiliary front panel power LED connector |
| R |
Intel 82801G I/O Controller Hub (ICH7) |
| S |
LGA775 processor socket |
| T |
Intel 82945G GMCH |
| U |
Remote thermal sensor |
| V |
Processor core power connector |
| W |
Processor fan connector |
| X |
DIMM Channel A sockets [2] |
| Y |
DIMM Channel B sockets [2] |
| Z |
Rear chassis fan connector |
| AA |
SPI flash device |
| BB |
Battery |
| CC |
Ethernet device |
| DD |
Audio codec |
| EE |
Parallel ATE IDE connector |
| FF |
Chassis intrusion connector | |
This applies to:
| 
