|
This following image shows the location of the major components on the Intel® Desktop Board D945GCLF2.
| Label |
Description |
| A |
PCI Conventional bus add-in card connector |
| B |
Front panel audio header Front panel USB headers |
| C |
Back panel connectors |
| D |
+12 V power connector (ATX12V) |
| E |
GMCH fan header |
| F |
Chassis fan header |
| G |
Intel Atom processor |
| H |
Intel 82945GC GMCH |
| I |
DIMM socket |
| J |
Main power connector |
| K |
Parallel ATA IDE connector |
| L |
SATA connectors [2] |
| M |
Front panel I/O header |
| N |
Battery |
| O |
Intel 82801GB I/O Controller Hub (ICH7) |
| P |
BIOS Setup configuration jumper block |
| Q |
Front panel USB headers |
| S |
S/PDIF connector | |
This following image shows the location of the major components on the Intel® Desktop Board D945GCLF2D.
| Label |
Description |
| A |
PCI bus add-in card connector |
| B |
Front panel audio header |
| C |
Back panel connectors |
| D |
12 V processor core voltage connector (2 x 2) |
| E |
Rear fan (3-pin) header |
| F |
Processor |
| G |
DDR 2 DIMM connector |
| H |
Main power connector (2 x 12) |
| I |
IDE connector |
| J |
Serial ATA connectors (2) |
| K |
Front panel header |
| L |
Battery |
| M |
BIOS configuration jumper |
| N |
Hi-speed USB 2.0 header |
| O |
S/PDIF connector (3-pin) | |
This applies to:
| 
