Support Home

Contact Support
Desktop Boards
Intel® Desktop Board D845HV
System memory for D845HV

Contents


Tested Memory
Memory testing has been performed under the following categories:

Advanced Tested Memory*
Intel provides the Advanced environmental test procedures, test software and necessary hardware to an independent test lab to perform Advanced testing as requested by the memory vendors.
Memory tested by Computer Memory Test Labs (CMTL)*.

Basic Self Tested Memory
Intel provides the Basic test procedures and test software to memory manufacturers to perform testing on their own products. These products are then listed on the manufacturer's own Web site. Use the Basic Self Tested Memory links to visit their sites to obtain information on their products.

Intel Internal Tested Memory
Intel's has a limited amount of memory tested for the desktop board. These part numbers may not be readily available throughout the product life cycle.

System Memory Features
The Intel® Desktop Board D845HV has two or three DIMM sockets and support the following memory features:
  • 3.3 V (only) 168-pin SDRAM DIMMs with gold-plated contacts
  • Unbuffered single-sided or double-sided DIMMs
  • Maximum total system memory*: 3 GB with 3 DIMMs, 2 GB with 2 DIMMs (using 512 MB technology); minimum total system memory: 32 MB
  • 133 MHz SDRAM DIMMs only
  • Serial Presence Detect (SPD)
  • Suspend to RAM support
  • ECC and non-ECC DIMMs

* The Intel® Desktop Board D845HV/D845WN have been designed to support DIMMs based on 512 Mbit technology for a maximum onboard capacity of up to 3 GB, but this technology has not been validated on this board.

Note If ECC functionality is required, all installed DIMM modules must be ECC compliant.


The following table lists the supported DIMM configurations.
DIMM Capacity Number of Sides SDRAM Density SDRAM Organization Front-side/Back-side Number of SDRAM devices
32 MB SS 64 Mbit 4 M x 16/empty 4
64 MB DS 64 Mbit 4 M x 16/4 M x 16 8
64 MB SS 64 Mbit 8 M x 8/empty 8
64 MB SS 128 Mbit 8 M x 16/empty 4
96 MB DS 64 Mbit 8 M x 8/4 M x 16 12
96 MB DS 128/64 Mbit 8 M x 16/4 M x 16 8
128 MB DS 64 Mbit 8 M x 8/8 M x 8 16
128 MB DS 128 Mbit 8 M x 16/8 M x 16 8
128 MB SS 128 Mbit 16 M x 8/empty 8
128 MB SS 256 Mbit 16 M x 16/empty 4
192 MB DS 128 Mbit 16 M x 8/8 M x 16 12
192 MB DS 128/64 Mbit 8 M x 8/8 M x 8 16
256 MB DS 128 Mbit 16 M x 8/16 M x 8 16
256 MB DS 256 Mbit 16 M x 16/16 M x 16 8
256 MB SS 256 Mbit 32 M x 8/empty 8
512 MB DS 256 Mbit 32 M x 8/32 M x 8 16

Note For Intel Desktop Board D845HV with two DIMM sockets, the maximum total system memory is 2 GB.

This applies to:
Intel® Desktop Board D845HV

End of Interactive Support Disclaimer
Intel no longer provides email, chat, or phone support for this discontinued product(s). Product support information on the Intel web site is provided for reference and subject to the "Terms of use".

Intel will not provide future software updates to support new operating systems or improve compatibility with third-party devices and software products.



Solution ID: CS-008808
Date Created: 25-Jan-2004
Last Modified: 30-Jul-2010
Back to Top