|
End of Interactive Support
Intel is announcing the end of interactive support for the Intel® Desktop Board D810EMO. See the End of Interactive Support Announcement for details.
Contents
Important Notes
System Memory Combinations
The desktop board has one, dual inline memory module (DIMM) socket.
Minimum memory size is 32 MB; maximum memory size is 256 MB. The
BIOS automatically detects memory type, size, and speed. Due to
the video requirements of the Intel Desktop Board D810EMO, most configurations
require at least 64 MB of memory.
The desktop board supports the following memory features:
- 168-pin DIMMs with gold-plated contacts
- 100 MHz SDRAM
- Non-ECC (64-bit)
- 3.3 V memory only
- Unbuffered Single- or double-sided DIMMs in the following sizes:
| DIMM Size |
Non-ECC Configuration |
| 32 MB |
4 Mbit x 64 |
| 64 MB |
8 Mbit x 64 |
| 128 MB |
16 Mbit x 64 |
| 256 MB |
32 Mbit x 64 |
|
NOTE: 256 MB DIMMs used with this board must be built with
128 Mbit device technology.
CAUTION: Because the main system memory is also used as video
memory, the board requires 100 MHz SDRAM DIMMs even if the processor
front side bus is 66 MHz. It is highly recommended that SPD DIMMs
be used, since this allows the BIOS to read the SPD data and program
the chipset to accurately configure memory settings for optimum performance.
If non-SPD memory is installed, the BIOS will attempt to correctly
configure the memory settings, but performance and reliability may
be impacted.
All memory components and DIMMs used with the Intel Desktop Board D810EMO must comply with the PC SDRAM Unbuffered DIMM Specification.
DIMM Vendors - Web Sites
The list below contains vendors that have tested their memory
for Intel Desktop Board D810EMO, and have their products listed on
their website. Please visit their sites to obtain information
on their products.
DIMM Vendors - SDRAM Non-ECC DIMMs
The table below lists parts which passed FULL testing conducted
by Intel for Intel Desktop Board D810EMO. For a complete
explanation of FULL testing see the Desktop
Board Component Functional Testing Levels page.
| Vendor |
Vendor Part Number |
Comments |
4M x 64 (32 MB), Unbuffered SDRAM, Non-ECC - 100 MHz
None available at this time. |
|
|
8M x 64 (64 MB), Unbuffered SDRAM, Non-ECC
- 100 MHz
None available at this time. |
|
|
16M x 64 (128 MB), Unbuffered SDRAM, Non-ECC
- 100 MHz
None available at this time. |
|
|
32M x 64 (256 MB), Unbuffered SDRAM, Non-ECC
- 100 MHz
None available at this time. |
|
|
|
† This link will take you off of the Intel Web site. Intel does not control the content of the destination Web Site.
This applies to:
| 
