|
Power supply requirements
The Intel® Desktop Board D810E2CB is designed to operate with at least a 145-watt power supply for typical system configurations.
Instantly available & STR (Suspend to RAM) support
The Intel® Desktop Board D810E2CB supports STR (Suspend to RAM) when used with STR capable:
- Operating system
- Add-in card(s)
- Driver(s)
- Application(s)
- Power supply with adequate +5VSB
Operating systems, add-in cards, drivers, and applications that do not support STR can cause problems when going into or coming out of low power (sleep) states.
Ultra ATA/66 & ATA/100 support
The Intel Desktop Board D810E2CB onboard IDE channels support Ultra ATA/66 transfer mode.
One megabyte less recognized memory than expected
The Intel Desktop Board D810E2CB uses 1 MB of system memory at boot-up for the VGA display.
Serial port connectors available on the Intel Desktop Board D810E2CB
The Intel® Desktop Board D810E2CB only provides a single DB9 Serial Port connection available at the I/O back panel connector.
This applies to:
| 
