|
End of Interactive Support
Intel is announcing the end of interactive support for the Intel® BL440ZX Motherboard. See the End of Interactive Support Announcement for details.
Contents
Important Notes
System Memory Combinations
The motherboard has two, dual in-line memory module (DIMM) sockets. Minimum memory size is 16 MB; maximum memory size is 256 MB. The BIOS automatically detects memory type, size, and speed.
The motherboard supports the following memory features:
- 168-pin DIMMs with gold-plated contacts
- 66 or 100 MHz SDRAM
- Non-ECC (64-bit) memory
- 3.3 V memory only
- Unbuffered Single- or double-sided DIMMs in the following sizes:
| DIMM Size |
Non-ECC Configuration |
| 16 MB |
2M x 64 |
| 32 MB |
4M x 64 |
| 64 MB |
8M x 64 |
| 128 MB |
16M x 64 |
|
Synchronous DRAM (SDRAM) can be installed in either or both sockets. EDO DIMMs are not supported. Memory size and speed can vary between sockets.
NOTE: Pentium II processors with 100 MHz front-side bus should be paired only with 100 MHz SDRAM.
Processors with 66 MHz front-side bus can be paired with either 66 MHz or 100 MHz SDRAM.
All memory components and DIMMs used with the Intel BL440ZX Motherboard should comply with the PC SDRAM
specifications. These include: the PC SDRAM Specification (memory component specific), the PC Unbuffered
DIMM Specification, and the PC Serial Presence Detect Specification.
NOTE: It is recommended that SPD memory DIMMs be used with the Intel BL440ZX Motherboard. However, the
BIOS will allow the use of non-SPD DIMM memory.
DIMM Vendors - Web Sites
The list below contains vendors that have tested their memory for Intel BL440ZX Motherboards, and that have their
products listed on their own website. Please visit their sites to obtain information on their products.
*Note: These sites will take you off of the Intel website. Intel is not responsible for the content on these sites.
Note: This board uses a 66 MHz chipset; however, you may use 66 MHz and/or 100 MHz memory.
DIMM Vendors - SDRAM Non-ECC DIMMs
The following tables list DIMMs that have been tested. DIMMs that are not listed should also function properly as long as their specifications are compatible with the devices listed below. In general, DIMM devices that are faster than those specified for a given platform will work, although no extra performance will be realized.
| Vendor |
Test |
Vendor Part Number |
Comments |
| 2M x 64 (16 MB), Unbuffered SDRAM, Non-ECC - 100 MHz |
| None at this time. |
| 2M x 64 (16 MB), Unbuffered SDRAM, Non-ECC - 66 MHz |
| Simple Technology |
FULL |
STI642106UD1-10VG |
|
| 4M x 64 (32 MB), Unbuffered SDRAM, Non-ECC - 100 MHz |
| None at this time. |
| 4M x 64 (32 MB), Unbuffered SDRAM, Non-ECC - 66 MHz |
| Simple Technology |
FULL |
STI644106UD2-10VG |
|
| 8M x 64 (64 MB), Unbuffered SDRAM, Non-ECC - 100 MHz
|
| Southland Micro Systems |
FULL |
SNT64MB-PC6 |
|
| 8M x 64 (64 MB), Unbuffered SDRAM, Non-ECC - 66 MHz |
| Samsung |
FULL |
KMM366S823BTL-G0 |
|
| Simple Technology |
FULL |
STI648116UD1-10VG |
|
| 16M x 64 (128 MB), Unbuffered SDRAM, Non-ECC - 100 MHz |
| Southland Micro Systems |
FULL |
SNT128MB-PC6 |
|
| 16M x 64 (128 MB), Unbuffered SDRAM, Non-ECC - 66 MHz |
| Simple Technology |
FULL |
STI16416116UD2-10VG |
|
| 16M x 72 (128 MB), Unbuffered SDRAM, Non-ECC - 66 MHz |
| Samsung |
FULL |
KMM374S1623BTL-G0 |
|
| 32M x 64 (64 MB), Unbuffered SDRAM, Non-ECC - 100 MHz |
| Samsung |
FULL |
KMM366S3323BT-GL |
|
|
† This link will take you off of the Intel Web site. Intel does not control the content of the destination Web Site.
This applies to:
| 
