|
The Intel® BI440ZX Motherboard has two, dual in-line memory module (DIMM) sockets. Minimum memory size is 16 MB; maximum memory size is 256 MB. The BIOS automatically detects memory type, size, and speed.
The motherboard supports the following memory features:
- 168-pin DIMMs with gold-plated contacts
- 66 or 100 MHz SDRAM
- Non-ECC (64-bit) memory
- 3.3 V memory only
- Unbuffered Single- or double-sided DIMMs in the following sizes
|
DIMM Size |
Non-ECC Configuration |
| 16 MB |
2M X 64 |
| 32 MB |
4M X 64 |
| 64 MB |
8M X 64 |
| 128 MB |
16M X 64 |
Synchronous DRAM (SDRAM) can be installed in either or both sockets. EDO DIMMs are not supported. Memory size and speed can vary between sockets.
All memory components and DIMMs used with the Intel BI440ZX Motherboard should comply with the PC SDRAM specifications. These include: the PC SDRAM Specification (memory component specific), the PC Unbuffered DIMM Specification, and the PC Serial Presence Detect Specification.
NOTE: Use SPD memory DIMMs with the Intel BI440ZX Motherboard. However, the BIOS does allow the use of non-SPD DIMM memory.
For a list of memory vendor websites, see the Tested Memory List.
This applies to:
| 
