|
|
|
 |
 |
|
| Intel® LM440LX Motherboard |
|
 |
|
Important Notes
System Memory Combinations
The motherboard has two dual inline memory module (DIMM) sockets. Minimum memory size is 16 MB; maximum memory size is 256 MB. The BIOS automatically detects memory type, size, and speed.
The motherboard supports the following memory features: - 168-pin DIMMs with gold-plated contacts
- 66 MHz SDRAM only
- Non-ECC (64-bit) and ECC (72-bit) memory
- 3.3 V memory only
- Single- or double-sided DIMMs in the following sizes
| DIMM Size | Non-ECC Configuration | ECC Configuration | | 16 MB | 2M x 64 | 2M x 72 | | 32 MB | 4M x 64 | 4M x 72 | | 64 MB | 8M x 64 | 8M x 72 | | 128 MB | 16M x 64 | 16M x 72 |
Memory can be installed in one or two sockets. Memory size can vary between sockets.
Note: To function properly, SDRAM DIMMs must meet the Intel 4-clock, 66 MHz, unbuffered SDRAM specification for either 64-bit or 72-bit SDRAM. See the Technical Product Specification for information about these specifications.
DIMM Vendors - Web Sites
The list below contains vendors that have tested their memory for Intel® LM440LX Motherboards, and that have their products listed on their own website. Please visit their sites to obtain information on their products.
Note: The following links will take you off of the Intel Web site. Intel does not control the content of these linked Web sites.
DIMM Vendors - SDRAM Non-ECC DIMMs
The following tables list DIMMs that have been tested. DIMMs that are not listed should also function properly as long as their specifications are compatible with the devices listed below. In general, DIMM devices that are faster than those specified for a given platform will work, although no extra performance will be realized.
Vendor Test | Vendor Part # | Comments | | 2 X 64 (16MB) | Non-parity | 4CLK, 66MHz | | Micron Technology | FULL | MT8LSDT264AG-662C1 | | Micron Technology | FULL | MT8LSDT264AG-66CL2 | | Samsung | FULL | KMM366S203BTL-G2 | | 4M x 64 (32 MB) | Non-parity | 4CLK, 66MHz | | Micron Technology | FULL | MT16LSDT464AG-662C1 | | Micron Technology | FULL | MT16LSDT464AG-66CL2 | | NEC | FULL | MC-454AD644F-A67 | | 8M x 64 (64 MB) | Non-parity | 4CLK, 66MHz | | NEC Electronics | FULL | MC458CB644A10 | | Samsung | FULL | KMM366S823ATL-G2 | | 16M x 64 (128 MB) | Non-parity | 4CLK, 66MHz | | NEC Electronics | FULL | MC4516AD644FA10 |
DIMM Vendors - SDRAM ECC DIMMs
Error checking and correcting (ECC) memory detects multiple-bit errors and corrects single-bit errors. When ECC memory is installed, the BIOS supports both ECC and non-ECC mode. ECC mode is enabled in the Setup program. The BIOS automatically detects if ECC memory is installed and provides the Setup option for selecting ECC mode. If any non-ECC memory is installed, the Setup option for ECC mode does not appear.
The following table describes the effect of using Setup to put each memory type in each supported mode. Whenever ECC mode is selected in Setup, some performance loss occurs. Memory Error Detection Mode Established in Setup Program ECC Disabled ECC Enabled Non-ECC DIMM No error detection N/A ECC DIMM No error detection Single-bit error correction, multiple-bit error detection
The following tables list DIMMs that have been tested. DIMMs that are not listed should also function properly as long as their specifications are compatible with the devices listed below. In general, DIMM devices that are faster than those specified for a given platform will work, although no extra performance will be realized.
| Vendor Test | Vendor Part # | Comments | | 2 X 72 (16MB) | Parity | 4CLK, 66MHz | | Micron Technology | FULL | MT9LSDT272AG-662C1 | | 4M x 72 (32 MB) | Parity | 4CLK, 66MHz | | Micron Technology | FULL | MT18LSDT472AG-662C1 | | 8M x 72 (64 MB) | Parity | 4CLK, 66MHz | | None at this time. | | | | 16M x 72 (128 MB) | Parity | 4CLK, 66MHz | | None at this time. | | |
† This link will take you off of the Intel Web site. Intel does not control the content of the destination Web Site.
This applies to:
|
|
|
|
End of Interactive Support AnnouncementThese products are no longer being manufactured by Intel. Additionally, Intel no longer provides interactive support for these products via telephone or e-mail, nor will Intel provide any future software updates to support new operating systems or improve compatibility with third party devices and software products.
THESE DOCUMENTS ARE PROVIDED FOR HISTORICAL REFERENCE PURPOSES ONLY AND ARE SUBJECT TO THE TERMS SET FORTH IN THE "LEGAL INFORMATION" LINK BELOW.For information on currently available Intel products, please see www.intel.com and/or developer.intel.com
|
|
Solution ID: CS-011570
Date Created: 18-May-2004
Last Modified: 01-May-2006
|
|
