To reset TCP/IP settings and administrator password:

1. Power the Storage Station up while pressing the Reset button with a pen.
2. Hold the Reset button for at least 3 seconds while the Power light is flashing.
3. Release the Reset button. The Check Alert light will flash to indicate the Storage Station was reset.

Resetting the Storage Station removes the Administrator password and resets the IP address to factory defaults. You will need to run the 'Find Storage Stations' from the Program menu to reconfigure the Administrator account and any customized IP address information. The files saved on the Storage Station are not affected by resetting.

To run Find Storage Stations:

1. Open Windows* Start menu.
2. From Programs, open the Intel® InBusiness™ Storage Station group.
3. Click Find Storage Stations.

This applies to:

Intel® InBusiness™ Storage Station