Intel® 82830M Graphics and Memory Controller Hub (GMCH) - Panel fitting does not stay enabled after rebooting

Support Home

Support & Downloads

Intel® 82830M Graphics and Memory Controller Hub (GMCH)

Panel fitting does not stay enabled after rebooting

Symptom(s):
Panel Fitting does not stay enabled after rebooting. The display does not stretch to fill the laptop screen in full screen applications and games that use resolutions below the native LCD resolution.

Solution:
This has been corrected in the 11.0.3.1 (and later) graphics driver.

Download the latest graphics drivers for the Intel® 82830M graphics controller.

For some laptops, upgrading the system BIOS will also resolve this issue. Check with the system manufacturer to see if a BIOS update is available.

Operating System:

Windows 98 SE*, Windows 2000*, Windows Me*, Windows NT 4.0*, Windows XP Professional*, Windows XP Home Edition*

This applies to:

Intel® 82830M Graphics and Memory Controller Hub (GMCH)

End of Interactive Support Disclaimer
These products are no longer being manufactured by Intel. Additionally, Intel no longer provides interactive support for these products via telephone or e-mail, nor will Intel provide any future software updates to support new operating systems or improve compatibility with third party devices and software products.

THESE DOCUMENTS ARE PROVIDED FOR HISTORICAL REFERENCE PURPOSES ONLY AND ARE SUBJECT TO THE TERMS SET FORTH IN THE "Terms of use". For information on currently available Intel products, please see www.intel.com/products.

Solution ID: CS-004660 (1.0.4487748.3559205)
Date Created: 01-Jan-2003
Last Modified: 19-Jun-2009