Intel® Pcmcia Faxmodems: List Of Compatible Systems

If a number in brackets appears after the manufacturer name, please see the notes at the end of this document.

/[R2] next to any model number indicates release 2 only.
/[R3] next to any model number indicates release 3 only.
/[R2,3] next to any model number indicates both releases.

The following is the list of systems that Intel has tested and found to be COMPATIBLE with Intel Faxmodems for PCMCIA, Intel's Card Manager Software and the fax and data communications applications shipped with the faxmodem. Intel is pursuing an active program of system acquisition and testing to ensure maximum usability for Intel products. This document will be updated as new systems are added to the list.

Manufacturer	System
ACER*	AnyWare V386SL, V486SL [R2,3]
ACER*	AcerNote 750C [R3]
Ambra* [1]	425, 433
AST*	PowerExec 3/25SL, 3/25SLC, 4/25SL, 4/25SLC [R2,3]
AST*	PenExec 3/25SL, 4/25SL [R2,3] (See NCR)
AT&T*
Canon*	NoteJet 486 [R2,3]
Compaq*	Concerto 4/25, 4/33 [R2,3], Aero 4/25 [R3]
DataGeneral*	Walkabout 386SL, 486SL [R2,3]
DEC*	DECpc 325SL, 325SLC [R2,3]
DEC*	DECpc 425SL, 425SLC Premium [R2,3]
Dell*	320SLi, 325SLi [R2,3]
Gateway* 2000	ColorBook series [R2,3]
Gateway* 2000	HandBook series [R2,3]
GRiD*	Convertible 4025N, 2260, 386SL, 486SL [R2,3]
IBM*	ThinkPad 350, 350C, 500 [R2,3]
IBM*	ThinkPad 720, 720C [R3 ONLY]
IBM*	ThinkPad 750, 750C [R2,3]
IBM*	PS2/E [R2,3]
NCR*	Safari 3150, 3170, 3180 [R2,3]
NEC*	UltraLite Versa Series [R2,3]
NEC*	Versa 40E E-Series [R2,3]
Olivetti*	Philos [R3], Quaderno 33 [R2,3]
Packard Bell*	Diplomat, Statesman [R2,3]
Samsung*	NoteMaster 486S/25N [R3]
Toshiba*	T1900, T1900C, T1910, T1910C, T1950, T1950C [R2,3]
Toshiba*	T3400, T3400CT [R2,3]
Toshiba*	T4500, T4500C, T4600, T4600C [R2,3]
Toshiba*	T4700CT [R2,3]
Unisys*	Open Notebook 325SL, 425SL [R3]
Zenith*	Z-Lite 320L, Z-Lite 4/25, Z-Star 433VL [R2,3]
ZEOS*	ColorNote [R2,3]

The following systems have been tested by Intel and found to be COMPATIBLE with the HARDWARE of the Intel Faxmodems for PCMCIA. However, these systems' internal PCMCIA controller chips do not support the Intel Card Manager software, and therefore:

• Intel recommends not removing or re-inserting the PCMCIA Faxmodem while the computer is turned on.

• The fax and data communications applications shipped with the Intel Faxmodem Release 2 (Intel FAXability and HyperAccess Lite Release 2) will not work on these systems.

• However, the communications and fax applications shipped with the Intel Faxmodem Release 3, and many others, work as long as the Intel Faxmodem is in the PCMCIA slot at power-up, the system recognizes it, and you don't expect to remove the faxmodem with the power on.

The following systems have been tested and found to be INCOMPATIBLE with Intel Faxmodems for PCMCIA.

Manufacturer	System
ABC*	BiCom B260I
Apple*	Newton
Casio*	Z-7000 PDA
CompuAdd*	425TXT
EO (AT&T)*	440, 880
Hyundai*	Courier, Neuron Lite 425SX
Mitac*	Micronote Lite 4010
Sharp*	6700 Series, PC 6800, 6881, ExpertPad
Tandy*	Z-PDA
Toshiba	3300

The following systems are INCOMPATIBLE with Intel Faxmodems for PCMCIA. They have PCMCIA Type I slots, which are too small for Intel PCMCIA Faxmodems or any other PCMCIA Type II card.

Manufacturer	System
Fujitsu *	PoqetPad
GRiD *	GridPad, PalmPad
HP*	95 LX
Memorex*	Commuter
Olivetti*	Quademo (however, Quaderno 33 is compatible)
PI*	Infolio
Poqet*	Computer
Samsung*	PenMaster
ZEOS*	Pocket PC

Notes

[1] For special installation instructions, order document 3434. [3] The HP 100 is compatible with the following Intel® PCMCIA Faxmodems: all Release 3 modems and Release 2 24/96 ONLY. It is NOT compatible with the Intel Cellular Faxmodem or International Faxmodem 14.4 for PCMCIA. [4] HP 100 and Omnibook computers have a proprietary device driver that you must activate before installing Intel Faxmodems for PCMCIA. Consult your HP documentation for precise instructions.

This applies to:

Modems and Fax Boards