|
LAN Manager Workstation/Server
v1.00
Location of Driver: Intel's online services
Select:
4 - File Downloads
1 - Network Products
5 - Adapters and Hubs
1 - EtherExpress Adapters
1 - Current Release
Select E10PMS.EXE
E10PMS.EXE expands onto diskette with the following structure:
(DOS) \MSLANMAN.DOS\DRIVERS\ETHERNET\E10P\E10P.DOS
(OS/2)\MSLANMAN.OS2\DRIVERS\ETHERNET\E10P\E10P.OS2
Sample Configuration Files
CONFIG.SYS (for DOS will contain):
DEVICE=C:\LANMAN\PROTMAN.DOS /I:C:\LANMAN
DEVICE=C:\LANMAN\E10P.DOS
CONFIG.SYS (for OS/2 will contain):
DEVICE=C:\LANMAN\PROTMAN.OS2 /I:C:\LANMAN
DEVICE=C:\LANMAN\E10P.OS2
PROTOCOL.INI (will contain):
[E10P_NIF]
; PROTOCOL.INI section for the Intel® EtherExpress™ PRO/10 PCI
; Adapter
DRIVERNAME = E10P$
General Installation
- Run the appropriate Microsoft* LAN Manager setup for the computer
you are setting up (DOS, OS/2 or OS/2 Server). When prompted for
the LAN adapter driver, select "Other Driver" (the EtherExpress™
PRO/10 PCI driver isn't included on the LAN Manager disk) and
insert the PRO/10 PCI Configuration and Drivers disk. Select the
EtherExpress™ PRO/10 PCI driver and follow the directions.
- When completed, reboot your computer in order for changes to take
effect.
Hints and Tips
- Parameters for the PROTOCOL.INI file:
DRIVERNAME: This is the one required parameter. See example at the
top of this document for syntax.
- Sample PROTOCOL.INI for LAN Manager:
- [PROTMAN]
- DRIVERNAME = PROTMAN$
- DYNAMIC = YES
- PRIORITY = NETBEUI
- [NETBEUI_XIF]
- Drivername = netbeui$
- SESSIONS = 6
- NCBS = 12
- BINDINGS = "E10P_NIF"
- LANABASE = 0
- [E10P_NIF]
- ; PROTOCOL.INI section for EtherExpress PRO/10 PCI
- ; LAN Adapter
- DRIVERNAME = E10P$
This applies to:
| 
