|
System Requirements for Ultra ATA/66 and Ultra ATA/100
(Ultra ATA/66 is also referred to as Ultra DMA/66 and Fast ATA-2):
- Must have previously installed the Intel® Chipset Software Installation Utility on your system
- Windows* Millennium Edition (Me), Windows 98 Second Edition (SE), Windows 98, Windows XP, Windows 2000, or Windows NT* 4.0 Operating System
- A motherboard with a supported chipset
- Ultra ATA/66 or Ultra ATA/100 compatible logic either on the motherboard, or on an Ultra DMA PCI adapter card
- Ultra DMA compatible BIOS
- Ultra ATA/66 or Ultra ATA/100-compatible IDE device such as a hard drive or CD-ROM
- A 40-pin, 80-conductor IDE cable. (A 40 pin 40 conductor IDE cable can be used with the Intel® Ultra ATA Storage Driver, but the 40 pin 40 conductor cable will limit the device to a maximum transfer rate of Ultra ATA/33)
This applies to:
| 
