Software Products
Intel® Rapid Storage Technology (Intel® RST)
Rebuilding a Degraded RAID Volume After a Failed Drive is Replaced

Follow these steps to rebuild a RAID volume after replacing a failed hard drive from a redundant RAID volume (RAID 1,5,10):

  1. Turn on the system.
  2. Click Start.
  3. Click All Programs.
  4. Click Intel.
  5. Click Intel® Rapid Storage Technology.
  6. Click Rebuild to another disk.
  7. Select the replacement hard drive and click Rebuild.

Additional instructions for performing a rebuild from the Option ROM are available in the User Guides.

This applies to:

Intel® Rapid Storage Technology (Intel® RST)

Solution ID: CS-029023
Last Modified: 08-Oct-2014
Date Created: 09-Apr-2008