|
To convert a RAID 1 volume to a recovery volume, use the following steps:
- Open the Intel® Matrix Storage Manager (Start » All Programs » Intel® Matrix Storage Manager » Intel® Matrix Storage Console), as shown in the following screen shot:

- Select Advanced Mode in the View menu.
- Right-click on the RAID 1 volume in the device tree and select Convert to Recovery Volume, as shown in the following screen shot:

- Select Next to continue.

- Modify the recovery volume name if you wish.
- Select which of the two hard drives will be used as the master hard drive for the recovery volume, as shown in the following screen shot:

- The other hard drive will be used as the source hard drive for the recovery volume. If you wish to change this, do so now, as shown in the following screen shot:

- Select an update policy for the recovery volume, as shown in the following screen shot:

- Select Finish to begin recovery volume creation.

This applies to:
|