Software Products
Intel® Rapid Storage Technology (Intel® RST)
Degraded RAID volume will not rebuild after failed hard drive is replaced

Description

I replaced a failed RAID hard drive with a new hard drive, but it's not rebuilding.

Solution

This is expected behavior. User action is required.

Use the following steps to start a rebuild of a degraded RAID volume after replacing the failed hard drive with a new hard drive of equal or larger size.

  1. Turn on the system.
  2. Open the Intel® RST user interface. After the operating system is running, click Intel RST in the start menu or right-click the Intel RST tray icon and click Intel RST.
  3. Click Rebuild to another disk.
  4. Select the new hard drive.
  5. Click Rebuild.

This applies to:

Intel® Rapid Storage Technology (Intel® RST)

Solution ID: CS-022296
Last Modified: 04-Oct-2012
Date Created: 20-Feb-2006