|
In order for your system to recognize hard drives that are larger than 137GB, we recommend the following steps** (select one option depending on your desired configuration):
Large Drive as Primary Drive (Boot Drive)
Note: If you are using Windows* Me, Windows 98 SE, or Windows 98, please see the 48-bit LBA BIOS Support page for information on BIOS support.
- Install the operating system
- Install the Intel® Application Accelerator
2a. Use a 3rd party hard drive partitioning software such as PartitionMagic* or Partition Commander* and increase the partition size to the hard drive's full capacity.
- or -
2b. Create additional partitions to take up the full capacity of the drive (e.g. one partition setup as 128GB and one extended logical partition setup as 24GB) Caution: Read Important Notice when Uninstalling the Intel Application Accelerator
Large Drive as Secondary Drive
Note: If you are using Windows* Me, Windows 98 SE, or Windows 98, please see the 48-bit LBA BIOS Support page for information on BIOS support.
- Install the large hard drive as a slave device
- Install the Intel Application Accelerator on the master hard drive
Caution: Read Important Notice when Uninstalling the Intel Application Accelerator
** You should always carefully follow any instructions that come from the hard drive or hard drive partitioning software manufacturer.
This applies to:
| 
