|
| IEEE Standard/Network Topology |
1000BASE-SX |
| Wiring |
Multi-mode Fiber (62.5 - 50um) |
Connectors
|
SC Connector
|
Features
|
 |
Intel® SingleDriver™ technology1 |
|
Plug and Play Specification Support |
|
Easy Installation, Intel® PROSet II Utility |
|
Auto-negotiation, Full-duplex Capable |
|
| Bus Type |
PCI 2.2, PCI-X 1.0 |
| PCI Buses Supported |
32/33,32/66,64/66,64/100,64/133 |
Features
|
|
Wired for Management (WfM) Baseline v2.0 Enabled for Servers |
|
DMI 2.0 Support, WMI and SNMP-manageable |
|
Offline Diagnostics |
|
Intel® Boot Agent (PXE 2.1 compliant) |
|
ACPI Power Management |
|
Platforms Supported
|
|
Windows* 2000, and XP |
|
Windows NT* 4.0 |
|
Novell NetWare* 4.11, 4.2, & 5.X |
|
SunSoft Solaris* 7 & 8 |
|
UnixWare* 7.x and OpenUNIX* 8 |
|
Linux* 2.2.5 or Later |
|
FreeBSD 4.0 or Later |
|
Features
|
|
Adapter Fault Tolerance |
|
Adaptive Load Balancing |
|
Gigabit EtherChannel* (when used with a capable switch) |
|
Intel® Link Aggregation (when used with a capable switch) |
|
IEEE 802.3ad (when used with a capable switch) |
|
PCI Hot Plug* and Active PCI* |
|
IEEE 802.1Q VLANs |
|
IEEE 802.3x Flow Control |
|
IEEE 802.1p, Packet Prioritization |
|
TCP Checksum Offload |
|
| Data Rate(s) Supported per Port |
1000Mbps |
| Integrated Memory |
64KB |
| Interrupt Levels |
INTA |
| IEEE Support |
802.2 & 802.3z |
| Data Path Width |
32-bit and 64-bit |
| Hardware Certifications |
FCC B, CE, BSMI B, VCCI B |
| Data Transfer Mode |
Bus-master DMA |
| Controller-Processor |
Intel® 82544EI |
| Typical Power Consumption |
1.3A @ +5VDC |
| Operating Temperature |
0-55°C |
Operating Humidity
|
85% at +55°C
|
Features
|
|
Limited Lifetime Warranty |
|
90-day Money-back Guarantee
(U.S. and Canada only) |
|
1 Only one driver needed for all Intel® PRO/1000 Network
Adapters.
2 NOTE: Advanced Server Adapter features are supported by Windows
XP, Windows 2000, Windows NT4.0 (SP5 and above) and Netware 4.11 (and
above).
|
Intel and SingleDriver are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Other names and brands may be claimed as the property of others.
|
|
|
