|
Products
|



|

|
| Product Codes |
Single Unit: PWLA8492MT*
*Bulk packs also available for minimum order quantities of five adapters. One driver CD per order of five units.
|
| Connectors |
Two RJ-45 |
IEEE Standard/Network Topology
 |
10BASE-T, 100BASE-TX, 1000BASE-T
 |
| Wiring |
Cat-5, 4-pair |
Features

|
 |
Intel® SingleDriver technology1 |
 |
Plug and Play Specification Support |
 |
Easy Installation, Intel® PROSet
II Utility |
 |
Auto-negotiation, Full-duplex Capable |
 |
Includes a Low-profile and a Full-height
Bracket |

|
| Cable Distance |
100m |
Features

|
 |
Wired for Management (WfM) Baseline
v2.0 Enabled for Servers |
 |
DMI 2.0 Support, WMI and SNMP-manageable |
 |
Offline Diagnostics |
 |
Dynamic Cable Diagnostics |
 |
Intel® Boot Agent (PXE 2.1 compliant) |
 |
ACPI Power Management |
 |
Wake on LAN* |
 |
PXE 2.0 |

|
Platforms Supported

|
 |
Microsoft Windows* Server 2003 and 2000 |
 |
Microsoft Windows* XP 32- and 64-bit Editions |
 |
Windows NT* 4.0 |
 |
Linux* 2.4.x or later (32- and 64-bit) |
 |
FreeBSD 4.x or later |
 |
Novell NetWare* 4.11,
4.2, 5.0, 5.1, 6.0 |
 |
SunSoft Solaris* 7, 8 |
 |
UnixWare* 7.x and OpenUNIX
8 (ddi8), SCO5* |

|
Features

|
 |
Adapter Fault Tolerance |
 |
Switch Fault Tolerance |
 |
Adaptive Load Balancing |
 |
Fast EtherChannel* (when used with
a capable switch) |
 |
Gigabit EtherChannel* (when used with
a capable switch) |
 |
IEEE 802.3ad (when used with a capable
switch) |
 |
Test Switch Configuration |
 |
PCI Hot Plug* and Active PCI* |
 |
IEEE 802.1Q VLANs |
 |
IEEE 802.3x Flow Control |
 |
TCP Checksum Offload |
 |
IEEE 802.1p |
 |
TCP Segmentation/Large Send Off-load |
 |
Interrupt Moderation |
 |
Save and Restore |

|
| Data Rate(s) Supported per Port |
10,100,1000Mbps |
| Bus Type |
PCI/PCI-X |
| Bus Width |
32- or 64-bit |
| Bus Speed (MHz) |
33/66/100/133 |
| Onboard Memory |
128 KB |
| Interrupt Levels |
INTA |
| IEEE Support |
802.3ab |
| Hardware Certifications |
FCC A, CE |
| Data Transfer Mode |
Bus-master DMA |
| ControllerProcessor |
Intel ® 82546 |
| Typical Power Consumption |
1A at +5VDC |
| Operating Temperature |
0-55°C |
Operating Humidity

|
85% at +55°C

|
| Length |
16.5cm (6.6 in) |
| Width |
6.4cm (2.5 in) |
| Height of Full-Height End Bracket |
12.1cm (4.75 in) |
| Height of Low-Profile End Bracket |
8.1cm (3.2 in) |
Features

|
 |
Limited Lifetime Warranty |
 |
90-day Money-back Guarantee (U.S. and Canada only) |

|

1 Only one driver needed for all Intel® PRO/1000 single and dual-port network adapters.

|
Intel and SingleDriver are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Other names and brands may be claimed as the property of others.
|
|
 |
|
|
|
|