The Intel® PRO/1000 PT and PF Quad Port Bypass Server Adapters provide in-line server appliances, such as Intrusion Protection Servers (IPSes), with high-performance, low-latency, in-line connectivity, and a bypass mode to ensure business continuity. These adapters also use the PCI Express* serial bus for greater throughput, and they support Intel® I/O Acceleration Technology (Intel® I/OAT) for further performance enhancement, including the reduced overhead so important to IPS applications.
The Intel® PRO/1000 PT and PF Quad Port Bypass Server Adapters are intended for use by equipment manufacturer hardware designers in application-specific in-line server appliances, where a bypass mode is desirable. Given that equipment manufacturers typically write specific software applications for their in-line platforms, Intel only provides open source reference drivers for these adapters. Interested hardware designers may contact their local Intel representative for additional product or purchase information.
|
|
|
|
|
| Feature |
Benefit |
| Two Intel® 82571GB controllers |
Enables four Gigabit connections in a single adapter, delivering increased bandwidth for slot-constrained servers |
| Bypass Mode |
Programmable bypass mode features real-time control, fail-open or close upon power failure detection, and watchdog timer |
| IEEE 802.3ab compatibility |
Support for Gigabit Ethernet industry-wide networking standard |
| RoHS compliant², lead-free¹ technology |
Compliant with the new European Union directive (effective July 2006) to reduce the use of hazardous materials |
| Compatible with x4, x8, and x16 full-height and low-profile PCI Express* slots |
Allows quad-port operation in almost any PCI Express* server slot, except x1 slots, and allows each port to operate without interfering with the others |
| Intel I/O Acceleration Technology |
Moves data more efficiently through new Dual-Core Intel® Xeon® processor-based servers for fast, scaleable, and reliable network performance. |
| NIC-in-front verions |
Provides a front-panel connector and LED and cable assemblies to allow port access and LED displays at the front of the server |
| Feature |
Benefit |
| Gigabit speeds on Category-5 cable networks |
Achieves Gigabit speeds on commonly deployed CAT-5 cabling without costly cable replacements |
| Compatible with Fast Ethernet |
Reduces training costs and quickly ramps rollout |
| Auto-sensing, self-configuring 10/100/1,000-Mbps performance |
Adapters will automatically sense when the network is able to support a faster speed, and self-configure to save IT staff time, money, and server downtime |
¹ Lead may still exist as a natural impurity below 1000ppm, or an approved RoHS exemption applies.
² Materials banned in RoHS Directive are either (1) below all applicable substance thresholds as proposed by the EU or (2) an approved/pending exemption applies.
