Products

Server and Workstation
Tools & Resources
Technical Resources
Novell SUSE* Information
Red Hat Linux* Information
WHQL Information
Intelligent Platform Management Interface Information
Product Compatibility Matrix
Server Configurator Tool
Buy intel Tools, Components & Accessories
Marketing Tools
Events, Training & Publications
Server Acceleration Alliance
Channel Program Member Resources
Support
Where to Buy
Home ›  Products ›  Server and Workstation ›  Server Chassis ›  Intel® Server Chassis SR2500 ›
Intel® Server Chassis SR2500
Recommended Configurations and Order Codes
 

 
Intel® Server Chassis SR2500 Order Codes
Order Codes Description Quantity
SR2500 Intel® Server Chassis SR2500 (2U) KDK - building block.

Kit Content Includes the Following:
Base Chassis, 3 LX system fans (2x 80mm & 1x 60mm), 1 (of 2) - 750W Power Supply Module, Power Distribution board, hotswap SAS/SATA backplane, Bridge Board, Air Duct and Baffles, DH10-DB9 Serial Cable, slim-line optical drive tray and interposer, 5 hard disk drive carriers, and low profile PCI-express riser card, rack handles. No power cord included.

NOTE: Requires additional Midplane Kit, Full Height Riser Option, and Control Panel Option Kit.
1
SR2500NA Intel Server Chassis SR2500 (2U) KDK - building block. Includes North American power cord

Kit Content Includes the Following:
Base Chassis, 3 LX system fans (2x 80mm & 1x 60mm), 1 (of 2) - 750W Power Supply Module, Power Distribution board, hotswap SAS/SATA backplane, Bridge Board, Air Duct and Baffles, DH10-DB9 Serial Cable, slim-line optical drive tray and interposer, 5 hard disk drive carriers, and low profile PCI-express riser card, rack handles.

NOTE: Requires additional Midplane Kit, Full Height Riser Option, and Control Panel Option Kit.
1
 
 
Required chassis options
 
 
 
Intel® Server Chassis SR2500 Required Option #1 - Midplane (choose one)
Order Codes Description Quantity
FALSASMP SR2500 (2U) SAS Midplane with optional ROMB 8 port SAS controller with optional HW RAID upgrade.

NOTE: RAID requires RAID activation key and RAID DIMM (cache) each sold separately
1
FALPASMP SR2500 (2U) Passive Midplane
Compatible with either SAS or SATA hard drives.

Kit Contents Include the Following:
Passive mid-plane with pass-through capabilities for either onboard SATA ports or a SAS/SATA add-in card, Enclosure management (I2C) cable.

NOTE: No SATA cables are included.
1
FALSASMP2 SR1550/SR2500 SAS Midplane 2 with optional ROMB 8 port SAS controller with optional HW RAID upgrade (support RAID 6).

NOTE: RAID requires new RAID activation key - AXXRAKSAS2 and new RAID mini DIMM - AXXMINIDIMM512.
1
Intel® Server Chassis SR2500 Required Option #2 - Full Height Riser Card
Order Codes Description Quantity
ASR2500FHR SR2500 (2U) Full Height PCI-Express* riser card (two PCI-Express* slots, one PCI-X slot). 1
ADRPCIXRIS SR2500 (2U) Full Height PCI-X riser card (three PCI-X slots). 1
ADRACTRIS SR2500 (2U) Full Height PCI-X "active" high performance riser card (three PCI-X slots). 1
Intel® Server Chassis SR2500 Required Option #3 - Control Panel (choose one)
Order Codes Description Quantity
ASR2500FP SR2500 Standard Control Panel (unit contains buttons, LEDs, front USB/video). 1
ASR2500LCP SR2500 Intel Local Control Panel (unit contains LCD, buttons, navigation buttons, USB). 1
 
 
Optional accessories
 
 
 
Intel® Server Chassis SR2500 Unique Optional Accessories & Spares
Order Codes Description Quantity
ASR2500SATA SR2500 - Set of six length-matched individual SATA cables bundled together. This kit is designed to be used to cable from the baseboard SATA ports to the passive Midplane.

NOTE: This cable kit is already included with the SR2500ALBRP SKU (5 Pack).
5
ASR2500SAS1 SR2500 - SAS PCI Cable Kit (set of two different ganged cables). Supports cabling from a SAS add in-card in the full height slot to the passive Midplane only (5 Pack). 5
ASR2500SAS2 SR2500 - SAS PCI Cable Kit. Supports cabling from add-in PCI card with SFF-8484 ganged connector in the full height slot to the passive Midplane only. This cable is recommended for use with the Intel® RAID Controller SRCSAS18E (5 Pack). 5
FSR2500LXFAN SR2500 LX hot swap redundant fan spare kit.
Contains 3 fans, one of each type (1 x 60mm, 2 x 80mm).

NOTES: Not compatible with BRP SKU fans. This SKU can also be used to add 2nd bank of fans upgrade the KDK SKU to redundant cooling.
1
FSR2500BRPFAN SR2500 BRP Non redundant fan spare kit.
Contains 2 fans, (1 x 60mm, 1 x 80mm). Not compatible with SR2500 LX SKU fans.
1
ASRLXFANS BRP to LX Fan upgrade kit.
This is a complete set of redundant/hot swap fans (six total) along with hot swap fan bracket and cabling. The upgrade requires removing the BRP fans and fan brackets and replacing the entire assembly. BRP and LX fans are not interchangeable.
1
ADRTAPEKIT SR2500 - SCSI tape mounting kit.
Contains tape tray, drive power cable (which connects to backplane) and terminated SCSI cable.

NOTE: This kit requires a 3rd party SCSI PCI add-in card with SR2500. Either this option or the 6th SAS/SATA drive kit can be installed (both can not supported simultaneously).
1
ASR2500SATAPE SR2500 - SAS/SATA tape drive mounting kit.
Contains tape drive mounting tray, one SATA/SAS cable and one power cable for tape drive (which connects to backplane).

NOTE: Either this option or the 6th SAS/SATA drive kit can be installed (both can not supported simultaneously).
1
ASR2500SIXDRV SR2500 - 6th SAS / SATA drive kit.
Contains one 3.5" drive carrier, backplane board insert, & cables (one power and one SAS/SATA) to enable a sixth hot swap SAS or SATA drive.

NOTE: Either this option or a Tape drive kit can be installed (both can not supported simultaneously).
1
ASR2500EESPR SR2500 Electrical spares kit.

Contains One Each of the Following:
hot swap backplane board, 6th drive backplane board and cables, SAS midplane, passive midplane, bridge board, front control panel board, optical drive interposer board, PCI-X active riser, PCI-X passive riser, PCIe FH riser, PCIe low profile riser, optical drive (IDE) cable, redundant fan cable bracket assembly, USB floppy cable, serial cable, I2C cable, one set of each type SATA/SAS cables, tape drive power cable, 80mm BRP fan, 80mm LX fan, 60mm BRP fan, 60mm LX fan, LCP interposer board.
1
ASR2500CHSPR SR2500 - Mechanical spares kit.

Contains spare PCI bracket assembly, BRP fan mounting structure, LX fan mounting structure, power supply air baffle, CPU duct assembly, hard drive carrier, hard drive carrier blank (for 6th drive/tape bay), 6th drive filler panel, metal fillers for GCM and I/O module knockouts, optical drive tray, optical drive bay filler panel, USB floppy adapter tray for optical bay, HDD to USB floppy adapter tray, tape drive mounting tray, standard control panel mounting tray, power supply blank filler, metal handles (one pair), top cover screw, midplane thumb screw.
1
FSR2500PKG SR2500 - spare packaging - box & set of cushions. Box designed to allow more space to include shipping bezel and rails along with the unit. Different than the packaging that ships with the Intel® Server Chassis SR2500 Building Blocks or Integrated Systems. 1
FSR2500LPR SR2500 Low-Profile Riser Spare. Features two PCI Express* slot and chassis intrusion switch.

NOTE: This a spare only, already included with all chassis and systems configurations.
1
FSR2500PDB SR2500 - Spare power distribution board 1
 
 
Intel® Server Chassis SR2500 Common Accessories & Spares
Order Codes Description Quantity
FPWRCABLENA North American power cord for SR1500, SR1550 & SR2500, 59 inches long, rated at 13A and 105°C. RoHS compliant. This is the same cord included in the "NA" SKUs. 1
AXXUSBFLOPPY Internal slim-line floppy kit. Works in SR2500 or SR1500 only.

Includes USB cable, slim floppy mounting tray for use in optical bay, hard drive to floppy converter tray, slim-line USB floppy drive.
1
AXXDVDROM Slim-line DVD-ROM, single pack with mounting screws. 1
AXXBASICRAIL SR1500/1550/2500 Basic slide rail kit. Does not support Cable Management Arm. 1
FXX1UFAN SR1500/SR1550 1U fan spare. Contains two 56mm fans, one with short cable, and one with long cable. 1
AXXRAK18E Intel® RAID Activation Key for SAS Midplane in SR1550/SR2500. Enables full intelligent SAS RAID solution engineered around the Intel® 80333 I/O Processor @ 500MHz. 5
AXXRSBBU3 Intel® RAID Smart Battery Backup module for use with Intel® Integrated Server RAID (requires AXXRAK18E) in SR1550/SR2550, provides up to 72 hours of cache memory retention when used with AXXMINIDIMM. 5
AXXMINIDIMM Mini DIMM registered DDR-2 for RAID cache in SR2500/SR1550. 1
 
 
Back to Top