|
| This page contains information needed to order and configure the Intel® Workstation Board S5000XVN with the Intel® Server Chassis SC5400 and SC5299 KDKs. |
|
|
| Production boxed Intel® Workstation Boards contain the following: |
|
|
|
| One baseboard with Common Enabling Kit (CEK) spring clips |
|
| ATX I/O shield, bumper and label |
|
| Cables: IDE, Serial B (COM2), six SAS/SATA cables for "SATA" SKU, two SAS/SATA cables for "SAS" SKU. |
|
| Resource CD-ROM with utilities, drivers, documentation and technical information |
|
|
| The production SC5400LX KDK includes: |
|
|
|
| Redundant (1+0) 830W PFC power supply with dual line cord support (full redundancy requires additional 830W module purchased separately) |
|
| Four redundant hot-swap fans and ducting |
|
| Support for up to six tool-free non hot-swap hard drives. Upgradeable to 10 hot-swap SAS or SATA. |
|
| Cables (one each): |
|
- Front Panel Cable (baseboard header to front panel)
- USB Cable (USB header to chassis front panel)
- Pre-routed IDE cable
- COM2 Cable
|
|
|
| Note: No AC power cords are included |
|
| The Intel® Server Chassis SC5400 is designed to work with boxed Intel processors that include a passive heat sink. |
|
|
| The production SC5400BRP KDK includes: |
|
|
|
| Redundant (1+0) 830W PFC power supply with dual line cord support (full redundancy requires additional 830W module purchased separately) |
|
| Two non-redundant cooling fans |
|
| Support for up to six tool-free non hot-swap hard drives. Upgradeable to 10 hot-swap SAS or SATA. |
|
| Cables (one each): |
|
- Front Panel Cable (baseboard header to front panel)
- USB Cable (USB header to chassis front panel)
- Pre-routed IDE cable
- COM2 Cable
|
|
|
| Note: No AC power cords are included |
|
| The Intel® Server Chassis SC5400 is designed to work with boxed Intel processors that include a passive heat sink. |
|
|
| The production SC5300 Base KDK includes: |
|
|
|
| Non-redundant 670W PFC power supply |
|
| Two non-redundant cooling fans |
|
| Support for up to six tool-free non hot-swap hard drives. Upgradeable to 6 hot-swap SAS or SATA. |
|
| Quick start guide |
|
| Cables (one each): |
|
- Front Panel Cable (baseboard header to front panel)
- USB Cable (USB header to chassis front panel)
- Pre-routed IDE cable
- COM2 Cable
|
|
|
| Note: No AC power cords are included |
|
| The Intel® Server Chassis SC5300 is designed to work with boxed Intel processors that include a passive heat sink. |
|
|
| The production SC5299WS SKU includes: |
|
|
|
| Non-redundant 670W PFC power supply |
|
| Two non-redundant cooling fans with ducting |
|
| Support for up to six tool-free non hot-swap hard drives. Upgradeable to hot-swap SAS/SATA 6-drive bay. |
|
| Cables (one each): |
|
- Front Panel Cable (baseboard header to front panel)
- USB Cable (USB header to chassis front panel)
|
|
|
| Chassis intrusion switch assembly |
|
| Quick start guide |
|
| Note: No AC power cords are included |
|
| The chassis is designed to work with boxed Intel processors that include an active heat sink. |
|
|
| The production SC5299DP SKU includes: |
|
|
|
| Non-redundant 550W PFC power supply |
|
| One non-redundant cooling fan |
|
| Support for up to six tool-free non hot-swap hard drives. Upgradeable to hot-swap SAS/SATA 6-drive bay. |
|
| Cables (one each): |
|
- Front Panel Cable (baseboard header to front panel)
- USB Cable (USB header to chassis front panel)
|
|
|
| Chassis intrusion switch assembly |
|
| Quick start guide |
|
| Note: No AC power cords are included |
|
| The Intel® Entry Server Chassis SC5299DP is designed to work with boxed Intel processors that include an active heat sink. |
|
|
| The production SC5299BRP SKU includes: |
|
|
|
| Redundant (1+0) 650W PFC power supply with dual line cord support (full redundancy requires additional 650W module purchased separately) |
|
| One non-redundant cooling fan |
|
| Support for up to six tool-free non hot-swap hard drives. Upgradeable to hot-swap SAS/SATA 6-drive bay. |
|
| Cables (one each): |
|
- Front Panel Cable (baseboard header to front panel)
- USB Cable (USB header to chassis front panel)
|
|
|
| Chassis intrusion switch assembly |
|
| Quick start guide |
|
| Note: No AC power cords are included |
|
| The Intel® Entry Server Chassis SC5299BRP is designed to work with boxed Intel processors that include an active heat sink. |
|
|
| Common accessories include: |
|
|
|
| Hot-Swap Drive Bays: |
|
- AXX6DRV3GEXP: Expander-based 6-drive bay that supports SAS/SATA drives. Requires two free SAS ports from the integrated SAS controller, ROMB Card or SAS RAID card.
- AXX4DRV3GEXP: Expander-based 4-drive bay that supports SAS/SATA drives. Requires two free SAS ports from the integrated SAS controller, ROMB Card or SAS RAID card. Only supported in SC5400 chassis family.
- AXX6DRV3G: 6-drive bay that supports SAS/SATA drives. Requires six free SAS or SATA ports.
SAS hard drive support requires SAS connectors from a SAS enabled board SKU, ROMB Card or SAS RAID Card.
- AXX4DRV3G: 4-drive bay that supports SAS/SATA drives. Requires four free SAS or SATA ports. SAS hard drive support requires SAS connectors from a SAS enabled board SKU, ROMB Card or SAS RAID Card. Only supported in SC5400 chassis family.
|
|
|
| FXX830WPSU: Additional 830W power supply module – required for full redundancy (for SC5400LX and SC5400BRP only) |
|
| ARIGRACK: Rack conversion kit (SC5400LX and SC5400 only) |
|
| APP3RACKIT: Rack conversion kit (SC5299-E only) |
|
|
| Intel® Workstation Board S5000XVN Order Codes |
| Intel® Building Block |
Description |
Quantity |
| S5000XVNSATAR |
Intel® Workstation Board S5000XVN SATA boxed board with six SATA ports and audio. Includes I/O shield, gasket, cables and reference CD. |
 5 |
| S5000XVNSASR |
Intel® Workstation Board S5000XVN SAS boxed board with six SATA ports. Includes I/O shield, gasket, cables and reference CD. |
5 |
| BB5000XVNSATA |
Intel® Workstation Board S5000XVN SATA boxed board with six SATA ports and audio. Includes I/O shield, gasket, cables and reference CD. |
10 |
| BB5000XVNSAS |
Intel® Workstation Board S5000XVN SAS boxed board with six SATA ports. Includes I/O shield, gasket, cables and reference CD. |
10 |
|
