 This high-performance Managed Layer 2/3 switch provides twenty-four 10/100 Mbps Ethernet ports and two Gigabit Ethernet ports for fast connection speeds and flexibility in a 6U CompactPCI* form-factor board. The PICMG* 2.16-compliant, in-chassis switch minimizes external wiring, thus improving density and reliability. Console access is enabled through an RS-232 serial cable to configure SNMP, Telnet, CLI and RMON management functionalities.
The Intel NetStructure® ZT 8101 10/100 Ethernet Switch features an easy-to-use browser/Web-based management console. It routes and switches at full wire speed utilizing non-blocking architecture, and has sophisticated multicast protocols to limit unnecessary traffic. Front panel ports provide multiple Fast Ethernet and Gigabit Ethernet connections without the need for a rear transition card. Additionally it provides an in-chassis switch fabric that can operate in a redundant configuration.
The PICMG 2.16 Packet Switching Backplane Specification blends the benefits of CompactPCI with the broad acceptance of Ethernet. Intel's high-performance building blocks simplify development and provide an economical, scalable path to the next-generation Internet and voice communications network. |
|
| Full wire speed on all ports
|
| VLAN IEEE* 802.1Q - ID tagging, 802.1p priority
|
| 802.3ad link aggregation
|
| Packet filtering and port security
|
| Multicast and broadcast storm control
|
| GVRP/GMRP VLAN and multicast registration
|
| DHCP/BootP packet forwarding
|
| RIPv1, RIPv2 routing, DVMRP, PIM (dense mode)
|
| Port mirroring
|
| Low port latency
|
| Hot-swappability with LED indication
|
| Designed for interoperability within third-party PICMG 2.16-compliant platforms
|
|
|
|
|
