Products
Intel® Desktop Boards
Home ›  Products ›  Intel® Desktop Boards ›  Desktop Board D101GGC ›
Intel® Desktop Board D101GGC
System Memory
 
Tested Memory
Supported System Bus Frequency and Memory Speed Combinations
Supported DIMM Configurations

Tested Memory

Memory testing has been performed under the following category:

3rd Party Tested Memory

3rd party tested memory occurs as requested by the memory vendors and is tested at an independent memory house that is not a part of Intel.
Memory tested by Computer Memory Test Labs (CMTL).
Note: This link will take you away from Intel's web site.

System Memory Features

The board has two DIMM sockets and support the following memory features:

2.5 V (only) DDR SDRAM DIMMs
Unbuffered, single-sided or double-sided DIMMs with the following restriction:
Double-sided DIMMs with x16 organization are not supported.
Minimum total system memory: 128 MB
Non-ECC DIMMs
Serial Presence Detect
DDR 400 MHz and DDR 333 MHz SDRAM DIMMs

The following table lists the supported system bus frequency and memory speed combinations.

Supported system bus frequency and memory speed combinations
To use this type of DIMM... The processor's system bus frequency must be...
DDR 400 800 MHz
DDR 333 800 or 533 MHz

Note
To be fully compliant with all applicable DDR SDRAM memory specifications, the board should be populated with DIMMs that support the Serial Presence Detect (SPD) data structure. This allows the BIOS to read the SPD data and program the chipset to accurately configure memory settings for optimum performance. If non-SPD memory is installed, the BIOS will attempt to correctly configure the memory settings, but performance and reliability may be impacted or the DIMMs may not function under the determined frequency.

The following table lists the supported DIMM configurations.

Supported DIMM Configurations
DIMM Capacity Configuration SDRAM Density SDRAM Organization Front-side/Back-side Number of SDRAM Devices
128 MB SS 256 Mbit 16 M x 16/empty 4
256 MB SS 256 Mbit 32 M x 8/empty 8
256 MB SS 512 Mbit 32 M x 16/empty 4
512 MB DS 256 Mbit 32 M x 8/32 M x 8 16
512 MB SS 512 Mbit 64 M x 8/empty 8
512 MB SS 1 Gbit 64 M x 16/empty 4
1024 MB DS 512 Mbit 64 M x 8/64 M x 8 16
1024 MB SS 1 Gbit 128 M x 8/empty 8

Note: In the second column, "DS" refers to double-sided memory modules (containing two rows of SDRAM) and "SS" refers to single-sided memory modules (containing one row of SDRAM).

Back to Top