|
Products
|
 |
Intel® 875P MCH |
 |
Highlights |
Software Overview
The Intel® 875P MCH is an excellent choice for developers of communications, storage, security and industrial automation applications, where outstanding memory performance, ECC, and extended I/O capabilities are desired.
| |
|
|
|
|
Flexibility and scalability of this development kit are exceptional. In addition to support for DDR SDRAM at 400, 333, or 266 MHz, the Processor System Bus (PSB) supports 800, 533, 400 MHz. As a result, the Intel® Pentium® 4 processor, Intel Pentium 4 processor with Hyper-Threading (HT) Technology¹, and related Intel® Celeron® processors can be readily interchanged. Likewise, the proper selection of processor and memory technology can be easily prototyped to evaluate different performance envelopes.
Advanced capabilities, such as PCI-X, SATA, Intel® Communications Streaming Architecture (CSA) and Intel® Performance Acceleration Technology (Intel® PAT) can also be evaluated with this development kit.
| Product Code: | EID875PDEVKIT |
| |
|
 |
|
| Evaluation Board Support |
 | Intel Pentium 4 processor, Intel Pentium 4 processor with HT Technology, or Intel Celeron processor at 800/533/400 MHz PSB speeds in µFC-PGA 478 packaging |
| Intel 875P Memory Controller Hub (MCH) supports up to 4 GB DDR SDRAM at 400/333/266 MHz
 |
CSA port for direct Gb Ethernet connection |
|
AGP 8x |
|
Dual-channel ECC |
|
AMI evaluation BIOS |
|
Intel PAT |
|
| Intel 6300ESB I/O Controller Hub
|
PCI-X (66 MHz), PCI, USB 2.0, SATA/150, ATA/100 |
|
Integrated dual-stage watchdog timer |
|
Integrated serial interface unit |
|
| GPIOS |
| Port 60/64 Emulation |
| LPC |
| AC '97 |
|
|
| Board Peripheral Features |
| Super I/O to support floppy, PS/2 mouse, keyboard, parallel port, and serial port (via header) |
|
|
| User-Accessible On-Board Connectors |
| PS/2 mouse, keyboard |
| Parallel port (from super I/O) |
| Two serial ports (from 6300ESB) |
| Serial port header (from Super I/O) |
| Four USB 2.0 ports |
| Two Gb Ethernet ports |
| Two IDE connectors |
| Two SATA connectors |
| Floppy connector |
| Three 32-bit PCI slots |
| Two 64-bit PCI-X slots |
| One CNR slot |
| One AGP slot |
| ITP connector |
| Four DDR DIMM slots |
|
|
| Included in the Kit |
| Development board |
| Intel Pentium 4 processor with HT Technology, 3.0 GHz, with 800 MHz PSB, or Intel Pentium 4 processor 2.8 GHz, with 533 MHz PSB |
| CPU thermal solution |
| Two 256 MB, 333 MHz DDR DIMMS |
| Cable kit (IDE, SATA, floppy) |
| CD including Intel-developed drivers that enable Windows* XP, Windows* XP Embedded, Windows* 2000, Windows* 2003 Advanced Server, Red Hat Linux* 8.0 Pro, Red Hat Advanced Server*, INF Utilities |
|
|
|
|
|
|
In order to provide customers with a complete development environment in the development kit, Intel works to enable the platform to integrate with customer applications and operating systems. Any software/firmware provided in the kit is subject to change without notice.
|
|
| 1 Hyper-Threading Technology requires a computer system with an Intel® Pentium® 4 processor supporting HT Technology and a HT Technology enabled chipset, BIOS and operating system. Performance will vary depending on the specific hardware and software you use. See Hyper-Threading Technology for more information. |
|
|
|
