Products
Home ›  Hardware Design ›  Consumer Electronics ›  Components ›
Intel® CE 5039
DVB-S Free-to-Air* Tuner
 
Overview Technical Documents
 

 
 
Intel® CE 5039 The Intel® CE 5039 DVB-S Free-to-Air* tuner is a fully integrated L band zero intermediate frequency (ZIF) tuner that meets the performance requirements of the European Broadcast Union ETS 300-421. The Intel CE 5039 DVB-S tuner features a programmable RF loop-through, independent RF and IF automatic gain control (AGC), and fully integrated “power and forget” voltage controlled oscillators (VCOs) and baseband filters that require no calibration, alignment or temperature/aging compensation.

The baseband channel filters have continuously programmable bandwidth for 1 to 45 Msps operation. The Intel CE 5039 DVB-S Free-to-Air tuner has excellent sensitivity performance at low power consumption and includes software/hardware power-down modes for Energy Star* requirements.
 
 
Product information
 
 
 
Satellite receiver application
 
Intel supports the Intel® CE 5039 DVB-S Free-to-Air tuner with a reference design for the Free-to-Air market segment. This reference design uses the Intel® CE 6313 QPSK DVB-S demodulator and enables you to quickly evaluate and implement the DVB-S standard for your application.

The solution includes complete documentation and test results, with software supported directly by Intel. It offers excellent signal-handling performance at very low power consumption and is optimized for the specific field requirements of the Free-to-Air market segment.
 
 
Product features
 

Intel® CE 5039 DVB-S Free-to-Air* Tuner
  • Performance compliance standards
    • ETSI ETS300 421 DVB-S
  • Programmable RF loop-through
  • High sensitivity <–84.5 dBm at 27.5 Msps
  • Independent RF and IF AGC control
  • Fifth-order baseband filters with bandwidth adjustable from 6 to 43 MHz
  • Fully integrated—alignment free—“power and forget” baseband filters and VCOs
  • Low power consumption from 3v3 supply
    • Less than 510 mW (typical) normal operation—RF loop-through enabled
    • Eco-friendly standby 10 mW and sleep modes 0.7 mW
  • Eutelsat DiSEqC* 2v2 receive/transmit for full control of LNB and dish
  • Operational temperature range –10 to +85°C
  • Compact 28-pin QFN 5x5 mm package
Simplified design
  • Full RF and IF “on-chip” integrated feature set
    • VCOs and PLL frequency synthesizer
    • Baseband filters
    • RF loop-through
    • RF and IF AGC control
  • Simple programmability using 2-wire bus interface
  • Full front-end receiver designs for Free-to-Air applications using the Intel CE 6313 DVB-S demodulator
Customer support
  • Offered with a production-ready reference design optimized for the Free-to-Air market segment
 
Back to Top
 
 
Product technical data
Further technical data, documentation and software on all DTD products is available to Registered Intel customers using the Intel Premier technical support web based tool.
 

 
Reference designs