The browser version you are using is not recommended for this site.
Please consider upgrading to the latest version of your browser by clicking one of the following links.

Support

Requirements to Use SSD Hard Drives for Intel® Modular Server System MFSYS25/MFSYS25V2/MFSYS35


Last Reviewed: 08-Sep-2016
Article ID: 000007228

The AXXTM3SATA accessory (MM# 903639) must be used to add SSD hard drives to the Intel® Modular Server Systems MFSYS25, MFSYS25V2, or MFSYS35.

Attaching the board and bracket assembly to a 2.5" Solid-State Drive (SSD) or a 2.5" Serial ATA (SATA) hard drive converts the single port SATA interface into a dual port SAS interface.

The drive can now be accessed by both storage control modules if they are installed. It also changes the activity LEDs to match the behavior of SAS hard drives.

Image of Board and bracket assembly

Limitations and instructions for using SATA drives can be found in the

Tested hardware and operating system list (THOL)