The browser version you are using is not recommended for this site.
Please consider upgrading to the latest version of your browser by clicking one of the following links.

Support

How to Clear the CMOS on the Intel® Entry Server Board SE7230NH1-E


Last Reviewed: 18-Jan-2017
Article ID: 000007545

The CMOS clear process on the Intel® Entry Server Board SE7230NH1-E and on the Intel® Server Platform SR1475NH1-E differs from other Intel® Server Boards.

To clear the CMOS on these products, use the following steps:

  • Shut down the server and disconnect the AC power cord from the main socket.
  • Open the chassis and move the CMOS clear jumper from the normal operation position, at pins 1 and 2 to the CMOS clear position, covering pins 2 and 3 as indicated in the following diagram:

 

CMOS clear jumper

  • Reconnect the AC power cord to the socket and leave the system for a few seconds. The standby power delivered to the system at this stage will clear the CMOS.
  • Remove the AC power cord from the socket.
  • Move the CMOS clear jumper to its original position on pins 1 and 2 (see above).
  • Close the server chassis, reconnect the power and boot your system.

Important safety information: Please always disconnect from the main power whilst working on an open system.